AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > JL Audio

JL Audio Ahead of the Curve

Reply
 
Thread Tools Display Modes
  #1  
Old 04-21-2021, 06:25 PM
UFTE's Avatar
UFTE UFTE is offline
Senior Member

 
Join Date: Sep 2009
Location: Detroit Michigan
Posts: 175
Default F113 Connection to MX122 & C2700

Hi all....questions and advice please on my F113 connection.

In my old house/theater, I had the F113 connected to my MX122 by a single XLR cable (SW1 XLR Output). It was used in both movies and music, so all was good. Prior to the MX122 I had the F113 connected via RCA, as my old processor did not have XLR ports (I will get to this later).

I am finally in process of setting up my theater in the new house and was going to hook everything up the same, using the XLR cable, so again, all was good. Last week I ended up ordering a C2700 to use for stereo only and will use the pass through mode on movies. I then realized that when the C2700 will be in use for stereo only, I would not have signal to the F113, so this brings my questions and advice:

I ran both the single XLR cable and the RCA cable from the front of the room to the back where the F113 will be.

My first question is if I connect the XLR cable from one of the XLR outputs on the C2700, will this be OK to send a full range signal to the F113 (I don't have an external crossover)?

Second question is I do have an XLR splitter and could get both L and R signals from the C2700 through the single cable to the F113....should I do this, or just use the single cable?

Third question is being that I have the RCA cable also ran, would it be best to use that to send signal to the F113 from the MX122 for movies instead of using the XLR for the C2700?

It is kind of too late to run another cable (XLR or RCA), so I am kind of freaking out as it is something I didn't take into consideration until now! I appreciate the feedback, or any other suggestions on how to get this going.

-Ryan
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 04:28 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video