AudioAficionado.org  

Go Back   AudioAficionado.org > Audio & Video > Tuners

Tuners FM, HD, Satellite

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2019, 08:54 AM
Clark2 Clark2 is offline
Senior Member
 
Join Date: Feb 2019
Location: Washington, DC, and vicinity, USA
Posts: 107
Default Pulling Good Analog Sound out of Severe HD "Self Noise"?

I just found out my local classical station "uses the Extended Hybrid Mode for HD Radio, which allows us to allocate up to 120 kbps total for all our digital channels combined. We currently only broadcast two channels, our main (HD-1) at 64 kbps, and our secondary channel Viva la Voce (HD-2) at 48 kbps." This must be the worst case for cramping the bandwidth of the analog channel and is almost certainly killing my old tuner with "HD self noise."

I'm looking for guidance on two questions:

1) Is it even possible to get really good sound from the analog channel of such a station?

2) If so, what are the best tuners for the job? I'd guess the IF band-pass would have to have very steep edges -- a digital tuner might be indicated -- but doesn't this imply higher distortion? Other factors? -- Clark2
Reply With Quote
  #2  
Old 03-06-2019, 09:21 AM
W9TR's Avatar
W9TR W9TR is offline
Senior Member
 
Join Date: Sep 2009
Location: The Neutral Zone
Posts: 4,665
Default

1.) Yes
2.) Look for a tuner with a good post-detection filter. Narrow IF's with steep slopes will help but also add to distortion as you've noted.

Some of the best performing tuners are :

Sony XDR-F1HD
Sangean HDT-1

They use DSP stereo decoding and have very good HD self noise rejection.

Brian Beasley has a lot of good information on HD self noise on his website:

http://www.ham-radio.com/k6sti/


Did you run FMFool to see if you have a strong adjacent channel HD station?

If you have a strong HD adjacent, it will impact your tuner choices as you'll need a tuner with a lot of IF stages and sharp cutoff ceramic filters. Something like the MR 80 or Sansui TU-X1 will fill the bill. The Magnum Dynalab tuners, as good as they are, just won't work as well in that specific situation.
__________________
Main System:
Amati Futura Mains
Amati Homage VOX Center,
Proac Response 1sc Rears,
Three MC2301's for L,C,R
MC 602 for the rears
C 1100, MX 151, MCD 1100, MR 80
Nottingham Dais with Wave Mechanic
Sumiko Palo Santos Presentation

SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC

MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material.

Lake House:
Ohm F, MC 275V, C2300, MR 77, Rega P3

OnDeck:
McIntosh MAC 4300v
Reply With Quote
  #3  
Old 03-06-2019, 09:50 AM
Formerly YB-2's Avatar
Formerly YB-2 Formerly YB-2 is online now
Retired

 
Join Date: Jan 2010
Location: NJ Shore
Posts: 8,404
Default

While Brian Beasley has done about all that can be done with HD he cannot defy the laws of physics. There is no way to obtain high fidelity from HD radio broadcasts with the available bit-rates. Brian is pretty much a 'voice in the wilderness' in his opinions on the SQ of HD (though I admit to having stopped reading his treatise some years ago - ).
__________________
Glenn...
Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag
Reply With Quote
  #4  
Old 03-06-2019, 10:17 AM
cleeds cleeds is offline
Senior Member


 
Join Date: Jul 2010
Posts: 1,432
Default

Quote:
Originally Posted by Clark2 View Post
I just found out my local classical station "uses the Extended Hybrid Mode for HD Radio ... " This must be the worst case for cramping the bandwidth of the analog channel and is almost certainly killing my old tuner with "HD self noise."

I'm looking for guidance on two questions:

1) Is it even possible to get really good sound from the analog channel of such a station?
Yes, it is.

Quote:
If so, what are the best tuners for the job? I'd guess the IF band-pass would have to have very steep edges -- a digital tuner might be indicated -- but doesn't this imply higher distortion? Other factors?
I'm not sure that a digital tuner offers any automatic advantage here. W9TR's suggestion of the McIntosh MR80 is a good one, and the MR80 is very much an analog tuner even though it has a digital readout. My MR80 still sounds great after all these years.

But having a strong adjacent channel with HD isn't imo the biggest problem, because the HD on your desired signal is likely to be just as big a problem.

Quality FM reception has always hinged a lot on location and the antennas, and that's still true. The better the receiving antenna, the higher the gain. The higher the gain, the less you'll notice the distortion inherent in a higher selectivity tuner.
__________________
Primary sources: VPI TNT III/SDS turntable, SME-V arm; Bryston BDP-3 digital player; Bryston BDA-3 DAC; McIntosh MVP-881 disc player; McIntosh MR-80 tuner. Preamplifier Audio Research Ref 5SE; Audio Research Ref Phono 2SE; Moon 430 HA. Amplifiers Conrad Johnson Premier 1B; Audio Research D-300; Bryston 4B. Speakers Infinity IRS Beta. Recorders Tandberg TD20A; Crown SX-822; Nakamichi 670ZX; Alesis Masterlink ML-9600. Power Tice Power Block/Titan (x2); McIntosh MPC1500; API Ultra II-20; multiple 20A derated dedicated lines.
Reply With Quote
  #5  
Old 03-06-2019, 10:30 AM
nicoff nicoff is offline
Member
 
Join Date: Sep 2012
Posts: 1,531
Default

If you are open to other options, have you considered streaming non-local classical radio stations that are streaming at higher rate bps? KDFC for example, streams at 128k. Or subscribing to a music service and create your radio stations based on music that you like?
Reply With Quote
  #6  
Old 03-06-2019, 04:15 PM
Clark2 Clark2 is offline
Senior Member
 
Join Date: Feb 2019
Location: Washington, DC, and vicinity, USA
Posts: 107
Default

Quote:
Originally Posted by cleeds View Post
...The higher the gain, the less you'll notice the distortion inherent in a higher selectivity tuner.
That's interesting! I never would have guessed it. Why would that be the case; not enough gain in the internal RF stages? -- Clark2
Reply With Quote
  #7  
Old 03-06-2019, 04:20 PM
Clark2 Clark2 is offline
Senior Member
 
Join Date: Feb 2019
Location: Washington, DC, and vicinity, USA
Posts: 107
Default

Quote:
Originally Posted by W9TR View Post
...
2.) Look for a tuner with a good post-detection filter. Narrow IF's with steep slopes will help but also add to distortion as you've noted.
...
If you have a strong HD adjacent, it will impact your tuner choices as you'll need a tuner with a lot of IF stages and sharp cutoff ceramic filters...
About (2), can you then use a wide IF pass-band if the post-detection filtering is good enough, and get rid of the self-noise without increasing distortion?

I don't think there's any problem with adjacent HD. The nearest that I know of is 2.4 MHz away. Will check...

Thanks for the good information. -- Clark2
Reply With Quote
  #8  
Old 03-06-2019, 06:06 PM
Clark2 Clark2 is offline
Senior Member
 
Join Date: Feb 2019
Location: Washington, DC, and vicinity, USA
Posts: 107
Default

Quote:
Originally Posted by W9TR View Post
...If you have a strong HD adjacent, it will impact your tuner choices as you'll need a tuner with a lot of IF stages and sharp cutoff ceramic filters.
Don't the HD sidebands actually overlap the bandwidth of an adjacent channel? Is it possible to overcome that even with a narrow IF? -- Clark2
Reply With Quote
  #9  
Old 03-07-2019, 08:38 AM
cleeds cleeds is offline
Senior Member


 
Join Date: Jul 2010
Posts: 1,432
Default

Quote:
Originally Posted by Clark2 View Post
Don't the HD sidebands actually overlap the bandwidth of an adjacent channel? Is it possible to overcome that even with a narrow IF? -- Clark2
Yes, there is overlap into the first adjacent. The extent to which narrow IF filters will help that hinges on a lot of variables - that's the nature of FM reception. But consider that while the first adjacent channel is just 200 kHz away, the FCC typically spaces stations in any market by 400 kHz. To be fair, with today's crowded FM band (in the US), that doesn't always quite work in practice.
__________________
Primary sources: VPI TNT III/SDS turntable, SME-V arm; Bryston BDP-3 digital player; Bryston BDA-3 DAC; McIntosh MVP-881 disc player; McIntosh MR-80 tuner. Preamplifier Audio Research Ref 5SE; Audio Research Ref Phono 2SE; Moon 430 HA. Amplifiers Conrad Johnson Premier 1B; Audio Research D-300; Bryston 4B. Speakers Infinity IRS Beta. Recorders Tandberg TD20A; Crown SX-822; Nakamichi 670ZX; Alesis Masterlink ML-9600. Power Tice Power Block/Titan (x2); McIntosh MPC1500; API Ultra II-20; multiple 20A derated dedicated lines.
Reply With Quote
  #10  
Old 03-07-2019, 09:38 AM
W9TR's Avatar
W9TR W9TR is offline
Senior Member
 
Join Date: Sep 2009
Location: The Neutral Zone
Posts: 4,665
Default

Quote:
Originally Posted by Clark2 View Post
Don't the HD sidebands actually overlap the bandwidth of an adjacent channel? Is it possible to overcome that even with a narrow IF? -- Clark2
Correct - the sidebands of first adjacent HD channels can become 'on channel' interference. Which is why it is so important to understand your local listening conditions. If you have any first adjacent channel issues then the problem is really hard to fix because of the on channel interference.

Narrow IF's help here, as does a directional antenna used to put the offending station in a null.

The easiest test to see if you have HD self noise is to switch your tuner to mono. If the noise goes away in mono, you have HD self noise or the signal you are receiving is not full quieting in stereo anyway. You need about 20 dB more signal strength to get full quieting in stereo vs mono. That's exclusive of HD self noise.

Tom
__________________
Main System:
Amati Futura Mains
Amati Homage VOX Center,
Proac Response 1sc Rears,
Three MC2301's for L,C,R
MC 602 for the rears
C 1100, MX 151, MCD 1100, MR 80
Nottingham Dais with Wave Mechanic
Sumiko Palo Santos Presentation

SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC

MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material.

Lake House:
Ohm F, MC 275V, C2300, MR 77, Rega P3

OnDeck:
McIntosh MAC 4300v
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 06:01 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video