AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > TAD Speakers & Electronics

TAD Speakers & Electronics Technical Audio Devices Laboratories

Reply
 
Thread Tools Display Modes
  #21  
Old 09-16-2021, 08:42 AM
Formerly YB-2's Avatar
Formerly YB-2 Formerly YB-2 is online now
Retired

 
Join Date: Jan 2010
Location: NJ Shore
Posts: 8,404
Default

Quote:
Originally Posted by Vintage Pete View Post
Understood, but it seems like from that diagram, we are sending full range signals to both amplifiers via the "Y" adapter. I would expect to see an active crossover fed from the preamp outputs, ahead of the LF and HF amplifiers...so we are sending lows to the LF amplifier, and highs to the HF amplifier.
"Y" adapters not needed as the C02-X has pairs of outputs.
An active crossover would be nice, but they have their own SQ problems to add into the mix. Especially the newer digital products.

Ivan - Did you add a 2nd pair of mono-blocks or a single stereo amp for your bi-amp configuration?
Bryston amps all the way in order to match gain?
__________________
Glenn...
Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag

Last edited by Formerly YB-2; 09-16-2021 at 08:48 AM.
Reply With Quote
  #22  
Old 09-16-2021, 09:38 AM
SCAudiophile SCAudiophile is offline
Guest
 
Join Date: Sep 2016
Location: Greenville SC
Posts: 4,531
Default

Vintage Pete: That's correct that in horizontal or vertical biamping like this, you send the same full range signal to all amps with either a single preamp output of sufficent gain over 1 interconnect pair that splits out to 2 pairs of interconnects feeding the amps via Y-cable correspondingly or better yet, using an advanced preamp that allows 2 simultaneous outputs like the Esoteric C-02X, C-02, C1 and many others, skip the Y adapter and run 2 pairs of interconnects. I have a preference for performance of the latter with the gear and setups where I've done this however what is best for your system is dependent on the gear and available cables.

The R1s do have jumpers that are normally engaged...replacing the good quality factory jumpers with bespoke jumpers matching your speaker cables yields even better results, fyi, based upon R1s and others that I've owned.

You do not need an active crossover with the R1s, or any biwire-able, biamp-able speaker to do this.

You could have a passive crossover built to handle the initial frequency split externally and some speakers do this with great results as the vendor preferred stock configuration while others provide add-ons (Evolution Acoustics EXACT external crossover is an example that does external traditional crossover you can add on later..). In that case however, unless the speaker has no internal crossover at, even if you are passively crossed over with an external box, you are still using the internal crossover in some ways.

When wiring up like this (biwire or biwire and biamped) you are still leveraging the internal crossover on the R1s for at least the mids and treble with kill filters/others parts making sure low frequency info is not sent to mids and treble and those drivers only receive the info they are supposed to. Kill filters or other parts on the speaker make sure that only low frequency info is sent to the bass drivers and any info beyond their intended operating range is not sent to them. Natural affinity of the drivers beyond that then guides the signal flow.

Last edited by SCAudiophile; 09-16-2021 at 09:46 AM.
Reply With Quote
  #23  
Old 09-16-2021, 10:14 AM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 78,483
Default

Quote:
Originally Posted by Formerly YB-2 View Post

Ivan - Did you add a 2nd pair of mono-blocks or a single stereo amp for your bi-amp configuration?
Bryston amps all the way in order to match gain?
I am using another (identical) pair of Bryston Monoblocks, so matched gain is achieved.
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES
Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES
Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES
Reply With Quote
  #24  
Old 09-16-2021, 05:07 PM
Vintage Pete's Avatar
Vintage Pete Vintage Pete is offline
Remembering Dan



 
Join Date: Apr 2009
Location: Tampa Bay, FL
Posts: 7,500
Default

Quote:
Originally Posted by SCAudiophile View Post
Vintage Pete: That's correct that in horizontal or vertical biamping like this, you send the same full range signal to all amps with either a single preamp output of sufficent gain over 1 interconnect pair that splits out to 2 pairs of interconnects feeding the amps via Y-cable correspondingly or better yet, using an advanced preamp that allows 2 simultaneous outputs like the Esoteric C-02X, C-02, C1 and many others, skip the Y adapter and run 2 pairs of interconnects. I have a preference for performance of the latter with the gear and setups where I've done this however what is best for your system is dependent on the gear and available cables.

The R1s do have jumpers that are normally engaged...replacing the good quality factory jumpers with bespoke jumpers matching your speaker cables yields even better results, fyi, based upon R1s and others that I've owned.

You do not need an active crossover with the R1s, or any biwire-able, biamp-able speaker to do this.

You could have a passive crossover built to handle the initial frequency split externally and some speakers do this with great results as the vendor preferred stock configuration while others provide add-ons (Evolution Acoustics EXACT external crossover is an example that does external traditional crossover you can add on later..). In that case however, unless the speaker has no internal crossover at, even if you are passively crossed over with an external box, you are still using the internal crossover in some ways.

When wiring up like this (biwire or biwire and biamped) you are still leveraging the internal crossover on the R1s for at least the mids and treble with kill filters/others parts making sure low frequency info is not sent to mids and treble and those drivers only receive the info they are supposed to. Kill filters or other parts on the speaker make sure that only low frequency info is sent to the bass drivers and any info beyond their intended operating range is not sent to them. Natural affinity of the drivers beyond that then guides the signal flow.
ScAudiophile....thanks for this explanation. I am of course familiar with passive crossovers, and also Bi and tri-amplification using an active electronic crossover to feed lows, mids and highs to separate amplifiers as the case may be. As you point out, unless the loudspeaker system has no crossover at all, we're still going to utilize the loudspeaker's internal crossover in some way. Such is the case in my primary setup, with an active crossover taking everything from 63hz down, summing it and sending it to a single mono amplifier to feed a subwoofer. The rest (above 63hz) is then sent to left and right mono amplifiers, which then feed my main loudspeakers as usual, and the main speaker's passive crossovers take care of the rest.

So, if I understand your explanation correctly, once the jumpers are removed from the R1's, and the separate terminals are fed from identical amplifiers, the low and hi-pass circuitries of the R1 are going to send what is needed to the appropriate drivers and disregard (roll off) the rest.

What was throwing me here is the use of a Y-adapter to bring amplifiers that are designated as "low" and high" amps without first utilizing an active crossover.

I also don't think I was ever familiar with the term "horizontal biamping", and strongly suspected that whatever that meant was likely key to my having a better understanding.

I have seen the jumper setups on some speaker systems and knew that these would be removed in certain applications, such as biamping. But, I never thought too deeply about how one might bi-amply this type of system, somewhat splitting things up inside (which is not what I am doing).

So, assuming I have all this right, I have one last question. You have mentioned in your post both "horizontal" and vertical" bi-amping. What is the difference here?
__________________
Pete

No. 35


Main System: VPI Prime Signature TT in Rosewood, Ortofon Cadenza Black, Stillpoints LP1 V2, McIntosh: MP100, MR78, MCD1000 Transport on Stillpoint Ultra Minis, MDA1000 D/A Converter on Stillpoint Ultra Minis, MS750 Music Server, C40, MC501's (3), Soundcraftsmen: DC2215 Eq/AS1000 Real time analyzer, DBX 3BX II, Carver C9, Nakamichi Dragon, Crown SX724, Crown D-75A (as headphone amp), Sony XBR55X900E 4K TV, JBL L220A's, JBL B460, Sumo Delilah active crossover, WireWorld Silver Eclipse audio interconnects, WireWorld Starlight and Silver Starlight Coaxial Digital interconnects, Wireworld SuperNova 7 Toslink digital interconnect, WireWorld Aurora 7 and Silver Electra Power cords, Wireworld Silver Eclipse 8 speaker cables, Terk AF-1 Powered Antenna, Oppo UDP-205 4K Blu-Ray Player, Bryson BUC-1 USB Converter, Wireworld Gold Starlight XLR Digital interconnect, PS Audio Direct Stream Power Plant 12 on Stillpoint Ultra Minis, PS Audio Dectect, FuruTech Flux-50 NCF Inline Power Filter, Add-Powr Wizard EM Field AC Line conditioner; Stillpoint Ultra SS's under (3) McIntosh MC501 Amplifiers

Florida Room/Art Studio System: Harmon Kardon T60 TT/Ortofon 2M Black, McIntosh: MR77, C32, MC2205; Crown Power Line Four, Wyred for Sound DAC-2 Digital to Analog converter, Soundcraftsmen AE2000 Eq, JBL 4313B's, JBL 2241-based Sub, JBL BX63A Active Crossover, Oppo BDP-105D Blu-Ray Player, Samsung 5500 Series 32" Smart TV, Terk AF-1 Powered Antenna

Master Bedroom System: McIntosh: MX120 Theater processor, MC206 6-channel amplifier; MR74 AM/FM Tuner, Oppo UDP-203 4K Blu-ray player, JVC HM-DH40000U D-Theater Digital VHS, Phase Technology PC80 Towers (now used as stands), (2) JBL 4401's, (1) JBL Studio 6IW speaker, (2) JBL Studio 6IC speakers, Sony XBR-49X900E UHD TV, Panamax 1000 Line Conditioner, (2) JL Audio E110 Subwoofers, Wireworld Solstice speaker cables, Wireworld Aurora Power cords, Wireworld Equinox and Solstice speaker cables and various other flavors of Wireworld and Audioquest cabling

Office System: Marantz 150 Tuner, Crown DL 2, Crown EQ 2, Crown SA 2, Crown D-75A (as headphone amp), McIntosh MCD7009 (as transport), DBX 3BX Series II, Oppo BDP-103 Blu-ray player, JBL 4401's, JL Audio E112 Subwoofer, Samsung 5500 series 32" Smart TV, Wire World Oasis audio interconnects, Wire World Solstice speaker cables, Wyred for Sound DAC-2 DSDse Digital to Analog converter, Wireworld Starlight Coaxial Digital Interconnect, Sennheiser HD800 Headphones, Sennheiser HDVA600 Headphone amp, Wireworld Silver Eclipse Balanced Interconnects, Wireworld Platinum Starlight USB Cable, Add-Powr EAU-2 AC Harmonic resonator

High Resolution Source: HP Omen 17" Gaming Laptop
Reply With Quote
  #25  
Old 09-16-2021, 06:29 PM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 78,483
Default

Quote:
Originally Posted by Vintage Pete View Post
[B]
So, assuming I have all this right, I have one last question. You have mentioned in your post both "horizontal" and vertical" bi-amping. What is the difference here?
So, if you have a stereo amp; horizontal bi-amping has one channel going to the left woofers, and one channel going to the right woofers. Hence horizontal.

Vertical bi-amping would send one channel to the left woofers, and the other channel to the left mids/highs. Hence vertical.

You are now Bi-Amped Certified!
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES
Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES
Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES
Reply With Quote
  #26  
Old 09-16-2021, 08:33 PM
Formerly YB-2's Avatar
Formerly YB-2 Formerly YB-2 is online now
Retired

 
Join Date: Jan 2010
Location: NJ Shore
Posts: 8,404
Default

Quote:
Originally Posted by Masterlu View Post
I am using another (identical) pair of Bryston Monoblocks, so matched gain is achieved.
Do you think you will have enough power to drive those tweeter?

Someone I knew used to build SET amps (only a watt or three per channel) & speakers using TAD drivers. They often provided a stunning SQ. Even 20yr ago their bare drivers sold for $$thousands.
__________________
Glenn...
Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag
Reply With Quote
  #27  
Old 09-16-2021, 08:54 PM
Vintage Pete's Avatar
Vintage Pete Vintage Pete is offline
Remembering Dan



 
Join Date: Apr 2009
Location: Tampa Bay, FL
Posts: 7,500
Default

Quote:
Originally Posted by Masterlu View Post
So, if you have a stereo amp; horizontal bi-amping has one channel going to the left woofers, and one channel going to the right woofers. Hence horizontal.

Vertical bi-amping would send one channel to the left woofers, and the other channel to the left mids/highs. Hence vertical.

You are now Bi-Amped Certified!
Ivan....Ah!! Okay. I was thinking it may be something like that. Something to do with driver arrays.

I am honored to now be certified!

__________________
Pete

No. 35


Main System: VPI Prime Signature TT in Rosewood, Ortofon Cadenza Black, Stillpoints LP1 V2, McIntosh: MP100, MR78, MCD1000 Transport on Stillpoint Ultra Minis, MDA1000 D/A Converter on Stillpoint Ultra Minis, MS750 Music Server, C40, MC501's (3), Soundcraftsmen: DC2215 Eq/AS1000 Real time analyzer, DBX 3BX II, Carver C9, Nakamichi Dragon, Crown SX724, Crown D-75A (as headphone amp), Sony XBR55X900E 4K TV, JBL L220A's, JBL B460, Sumo Delilah active crossover, WireWorld Silver Eclipse audio interconnects, WireWorld Starlight and Silver Starlight Coaxial Digital interconnects, Wireworld SuperNova 7 Toslink digital interconnect, WireWorld Aurora 7 and Silver Electra Power cords, Wireworld Silver Eclipse 8 speaker cables, Terk AF-1 Powered Antenna, Oppo UDP-205 4K Blu-Ray Player, Bryson BUC-1 USB Converter, Wireworld Gold Starlight XLR Digital interconnect, PS Audio Direct Stream Power Plant 12 on Stillpoint Ultra Minis, PS Audio Dectect, FuruTech Flux-50 NCF Inline Power Filter, Add-Powr Wizard EM Field AC Line conditioner; Stillpoint Ultra SS's under (3) McIntosh MC501 Amplifiers

Florida Room/Art Studio System: Harmon Kardon T60 TT/Ortofon 2M Black, McIntosh: MR77, C32, MC2205; Crown Power Line Four, Wyred for Sound DAC-2 Digital to Analog converter, Soundcraftsmen AE2000 Eq, JBL 4313B's, JBL 2241-based Sub, JBL BX63A Active Crossover, Oppo BDP-105D Blu-Ray Player, Samsung 5500 Series 32" Smart TV, Terk AF-1 Powered Antenna

Master Bedroom System: McIntosh: MX120 Theater processor, MC206 6-channel amplifier; MR74 AM/FM Tuner, Oppo UDP-203 4K Blu-ray player, JVC HM-DH40000U D-Theater Digital VHS, Phase Technology PC80 Towers (now used as stands), (2) JBL 4401's, (1) JBL Studio 6IW speaker, (2) JBL Studio 6IC speakers, Sony XBR-49X900E UHD TV, Panamax 1000 Line Conditioner, (2) JL Audio E110 Subwoofers, Wireworld Solstice speaker cables, Wireworld Aurora Power cords, Wireworld Equinox and Solstice speaker cables and various other flavors of Wireworld and Audioquest cabling

Office System: Marantz 150 Tuner, Crown DL 2, Crown EQ 2, Crown SA 2, Crown D-75A (as headphone amp), McIntosh MCD7009 (as transport), DBX 3BX Series II, Oppo BDP-103 Blu-ray player, JBL 4401's, JL Audio E112 Subwoofer, Samsung 5500 series 32" Smart TV, Wire World Oasis audio interconnects, Wire World Solstice speaker cables, Wyred for Sound DAC-2 DSDse Digital to Analog converter, Wireworld Starlight Coaxial Digital Interconnect, Sennheiser HD800 Headphones, Sennheiser HDVA600 Headphone amp, Wireworld Silver Eclipse Balanced Interconnects, Wireworld Platinum Starlight USB Cable, Add-Powr EAU-2 AC Harmonic resonator

High Resolution Source: HP Omen 17" Gaming Laptop
Reply With Quote
  #28  
Old 09-16-2021, 09:23 PM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 78,483
Default

Quote:
Originally Posted by Formerly YB-2 View Post
Do you think you will have enough power to drive those tweeter?

Someone I knew used to build SET amps (only a watt or three per channel) & speakers using TAD drivers. They often provided a stunning SQ. Even 20yr ago their bare drivers sold for $$thousands.
It’s for Mid & Tweeter.

My TAD R1’s are now driven by 2KW’s each.
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES
Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES
Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES
Reply With Quote
  #29  
Old 09-16-2021, 10:32 PM
Grasshopper's Avatar
Grasshopper Grasshopper is offline
Aspiring Audiophile
 
Join Date: Mar 2013
Location: My House
Posts: 1,263
Default

Quote:
Originally Posted by Masterlu View Post
A sneak peek…





I can’t see the picture either. Just a broken link
__________________
Main > Aurender N10/N100 / Antipodes K50 > Aries Cerat Kassandra mk2 - Playback Designs Dream DAC > D'agostino Momentum HD > PS Audio P10 > D'Agostino S250 > Sonus Faber Aida / REL S812 Six Pack + 4 JL Audio F113 Fathoms > B&W Signature HTM > Anthem Statement D2v > Mcintosh MC205 > Focal 1000 (side surrounds) > Bryston TIW (rear surrounds)

Secondary System > Aurender N100h> AMR777SE > D'agostino Momentum Integrated > Wilson Sasha DAW
Reply With Quote
  #30  
Old 09-16-2021, 10:35 PM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 78,483
Default

Quote:
Originally Posted by cdobson View Post
Apologies- I meant I do not see a picture - hence no sneak peek. :-)
Well, let’s fix that right now!
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES
Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES
Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 05:23 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video