AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Shunyata Research

Shunyata Research Designing Silent Systems for recording, film and music

Reply
 
Thread Tools Display Modes
  #1  
Old 02-03-2021, 11:49 AM
SCAudiophile SCAudiophile is offline
Guest
 
Join Date: Sep 2016
Location: Greenville SC
Posts: 4,531
Default Shunyata OMEGA QR power cable looking back and current day impressions....

Originally posted in November 2019:

Shunyata OMEGA QR Power cord (15-amp) recent listening impressions:

*This is a long post, thanks for the patience to read it through,…

Going back almost 15 years and rolling forward with my 2004-2009 hybrid 7.1 HT and 2-channel setup which was by my
standards at least, monstrous in size, complexity and expense using dual-subs, full range speakers in 4 out 7 positions and near
full-range in the other 3, Esoteric 3-box stack (P-03U, D-03, G-0s), high-end video, video EQ (Lumagen, etc...) and all the trimmings,
I've owned a LOT of Shunyata products in the Hydra8 and Anaconda/Anaconda VX timeline so I am no stranger to Shunyata's
approach, quality, value for the money, customer service and attention to detail in all that they do.

Roll the clock forward ten years plus; the HT setup is gone,….I love music listening far more than even the best HT setups
I’ve ever had and have heard and no longer want the ever-changing formats, pre- and post-processing standards for video,
audio, etc…crazy complexity, crazy expense and the feeling of being behind the times ever after the most major of upgrades.
In short, I’ve been working to maximize my 2-channel playback sans going after vinyl which I always loved but again, cost, scale,
complexity, storage requirements, etc…are all something I did not want to take on again.

This is a every long-winded way of saying that I’ve put all my time, money and effort into pushing the envelope as we all
do to get the most realistic musical playback possible out of my D->A system. I have no time for non-full range speakers,
one to a few inch-wide sweet spots, laser sighting or satellite + GPS needed for speaker setup (obviously joking!!), speakers that
are precise, revealing, ultra-expensive with fan-attracting names but not able to play all the music I like musically, realistically and
without fatigue even when played 4, 6, 8, 10+ hours per day while I work, or critically listen, or simply relax in the house.

Two to 3 years ago I thought I’d squeezed all I could out of the system with 02-level Esoteric separates, preamp and amp,
10 MHz OP21 level Type2 master clock, SOTA speakers and many great digital and analog interconnects and speaker cables
plus a UK company’s 2-box power conditioner that was the finest I’d heard in 20 years of chasing the dragon as it were for power.

Enter Shunyata <again>…due in part to posts about the benefit of high quality word and master clocking external/other devices in the
D-to-A playback chain, I was asked to participate in a group of 5 anonymous testers all with different equipment over a multi-month
period to do double-blind testing of 50-ohm and 75-ohm clock cables for Shunyata. That began it all…1-2 years later and a lot of
great testing and learning later all digital cables (SIGMA 50-ohm clock and AES/EBU), several SIGMA and Anaconda Zitron/KPIP
analog XLRs and all my power conditioning is now and shall remain Shunyata. Part and parcel of this was the TRITON V3
which quickly displaced a 2-box SOTA setup from another vendor. I heard thee most musical sounds out of my systems that I’d
ever heard out of any system I’d built. Then came the TYPHON QR. The result that occurred when putting the TYPHON QR into the
system in front of the TRITON V3 is one that won’t be forgotten. I remember calling Caelin and dropping all the audiophile
crazy words and hyperbole and saying ‘my system just sounds like live music!’ and asking how exactly he pulled that off
in one passive box coupled to another.

Anyone who has taken TRITON V3, TYPHON QR, SIGMA, Alpha or Delta cables into their system of any kind and now
the Denali 6000/S v2, know what I’m taking about when I say that I believe Caelin and the team at Shunyata are ‘on a roll’
doing what I would say is the best work of their careers, no b.s. , no exaggeration.


ENTER THE OMEGA QR Power cord:

In all my demo time with the TRITON V3 and then the TYPHON QR in combo with it, and all the time after purchasing them,
I have found that they absolutely excel at improving the quality of playback and performance of any front-end component
all the way thru the chain. For me that is;

Transport, DAC, Master clock, Preamp, LPSU for active RoomEQ, Crossover and A->D->A components for my
Active speaker setup….

Plugging my SOTA Stereo amp (Esoteric A-02) into the combo and all the digital amps in my active speaker full-range
Setup (5 in all) also sounded great but frankly plugging any amplifier into a properly done dedicated circuit straight to
the wall as always performed better regardless of what power conditioning I had in the system at any point in time..

I had the good fortune about 2 weeks ago to be given a chance to spend 5 days with an new Shunyat OMEGA QR power cord.

The fit, finish and build quality (including a new SOTA wire-type internally) are truly world-class and eclipse even
the best from Shunyata thus far which is no easy task. The bespoke connectors, use of high grade carbon, flexibility
of the cable are all on a brand new level of excellence! I’m told these improvements will be studied for their application
to future cables as well. The aesthetic is to my eyes, beautiful to look at as well.

In short, the impact of using this cord is truly, no b.s., no exaggeration was mind-blowing to me….this cord is tailor made
for any amplifier, even digital (ICEpower2, etc…) with more modest current draw requirements but easily will maximize
the performance ff any amplifier, Tube, Solid State or Digital (IMHO). It certainly did that here with respect to all the
various amp connects to the wall in my setup that I tried.

I don’t know the topology or the innards of this cable except what has been circulated online thus far. To my listening
tests from the first hour forward out of the box, every single aspects of playback anywhere I plugged it in improved.

As a kicker, I also tried it on the LPSU for my Wavelet Active Crossover & RoomEQ and then on my DAC as well
and heard similar advances.

In every single case, particular and more striking differences for any amplifier and the LPSU for Wavelet, I heard;

- dramatic increase in sound stage definition and size in 3-dimensions

- rock-solid and dramatic increase in imaging performance top to bottom (floor to ceiling) and left to right

- deepening of the sound stage even further behind the walls and out into the room

- better performance and pacing of all playback, more immediacy and realism in the presentation of the most subtle to the most demanding dynamics in all sorts of music

- improved tonal correctness and ‘color of sound’ (hearing the different materials for drum heads, stick and mallet types, brushes, bows, etc….gold/silver/brass/no finish on trumpet, sax, etc…guitar, piano, violin and bass (double and electric) all rendered in an utterly real and transparent/correct way

- immediacy and pacing of the music; ultra-correct and realistic

- tightness and correctness of the image and improved ability to locate instruments, voices, etc….both individually and in ensemble and have them be what seems to see to be a more correct sizing

Frankly, I expected improvement, bigger in some areas than in othheers but what I heard amazed me as this cord pushed so many areas up on the
scale of playback quality simply through attaching it to one device at a time that I was and still am, shocked by what I heard.

From a ‘power conditioner’ point of view, this has just the right amount of QR/BB for noise elimination the right amount of
current flow and increased dynamic ability for current draw and whatever else amps and LPSUs need to sound their absolute
best.

In short, the most amazing single power cord + conditioning all in one cable for current-draw needs for amps of all kinds
(Even digital amps embedded in active speakers by the way) and LPSUs driving other core components. The effects and sound
quality improvements are not subtle and you won’t have to wait to hear them. The only way to equal it or better would be to be
fortunate enough to have individual TYPHON QRs for each amplifier you have and go 1:1 as is the case with a good friend
here who has 3 TYPHON QRs believe it or not (1 to drive his TRITON V3 and 1 each for his mono blocks)
and is very fortunate and flying in very rarefied airspace as it were !!!

Obvious questions answered:

Going forward at least until Caelin beats the combination, the TRITON V3 and TYPHON QR for transport, DAC, master clock
and pre-amp/processors to me is still the bar for top performance for non-amplifier and non-LPSU devices The OMEGA is excellent
when powering these devices however to my ears I will keep front-end devices plugged into the TRITON V3 and TYPHON QR.

For amplifiers of all types and LPSUs, the OMEGA QR is the cable to beat at its price point and much higher one for direct-to-wall connections.

I will be watching for the cascade of lessons learned in perfecting this OMEGA QR power cord to be brought to
future releases of other cords at more moderate price points rumored to be in the brainstorming process.

One word not the price of the OMEGA QR: yes, it a new price range for Shunyata for a pc; having heard many others at equal
and even higher price points, all of those vendors should be quite worried about what Caelin and team have packed into this
OMEGA QR and the Uber-musical results at a high, but responsible price.

Caelin and the team at Shunyata are ‘on a roll’ doing what I would say and I have heard in musical result is the best work of their careers!

I am grateful I had the opportunity to demo this cord for a few days. It was truly painful to put it in the box and ship
it off to the next destination!!!
Reply With Quote
  #2  
Old 02-03-2021, 11:49 AM
SCAudiophile SCAudiophile is offline
Guest
 
Join Date: Sep 2016
Location: Greenville SC
Posts: 4,531
Default

And bringing things up to the current day...

Circling back on the original write-up I did on Omega QR pre-production "first article" review and having had the good fortune
to obtain a production version of the cable several months ago and be living with it ever since, I repeated all prior component,
amplifier, processor and pre-amp testing configurations for several weeks at a time with the latest Omega QR power cable.

The original impressions and detailed listening results I perceived are still accurate and what I've found after several months
this cable delivers in ample amounts across the entire listening spectrum. I've not had the good fortune to be able to move to
an Omega XC for my Typhon QR with matching Omega XC umbilical but an hoping to move up from Sigma umbilical, etc...soon!

Many months later, the following are still my leading perceptions compared to all prior and current Shunyata Alpha and Sigma v1 and v2 cables, across every genre of music in my collection ;

- dramatic increase in sound stage definition and size in 3-dimensions

- rock-solid and dramatic increase in imaging performance top to bottom (floor to ceiling) and left to right

- deepening of the sound stage even further behind the walls and out into the room than ever before

- dead quiet, ultra-black backgrounds....

- better performance and pacing of all playback, more immediacy and realism in the presentation of the most subtle to the most demanding dynamics in all sorts of music

- improved tonal correctness and ‘color of sound’ (hearing the different materials for drum heads, stick and mallet types, brushes, bows, etc….gold/silver/brass/no finish on trumpet, sax, etc…guitar, piano, violin and bass (double and electric) all rendered in an utterly real and transparent/correct way

- immediacy and pacing of the music; ultra-correct and realistic

- tightness and correctness of the image and improved ability to locate instruments, voices, etc….both individually and in ensemble and have them be what seems to see to be a more correct sizing

- "simply sounds like great music", most audiophile hyperbole/typical wording no longer needed

A fantastic cable!!!
Reply With Quote
  #3  
Old 02-03-2021, 10:44 PM
KahunaCanuck's Avatar
KahunaCanuck KahunaCanuck is offline
Member

 
Join Date: May 2009
Location: Kelowna, BC
Posts: 1,107
Default

Thanks for a great write up!
__________________
McIntosh MA12000, Hifi Rose RS150B Streamer, Roon Nucleus + Server, JBL Classic L100 Classic 75s, REL S812s (x2), Pioneer PL-630 Vintage TT with Hana SL cart.
Reply With Quote
  #4  
Old 02-03-2021, 11:24 PM
crwilli's Avatar
crwilli crwilli is online now
Racing Hoopties

 
Join Date: Feb 2013
Location: Bluffton SC
Posts: 9,768
Default

Well done Mark!
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server
Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard
Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables,
Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU,
Cables: Wireworld Platinum 8 USB, Wireworld Platinum Eclipse 8 Speaker cables, 6M & 1M Tubulus Concentus ICs,
Other: Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack
Reply With Quote
  #5  
Old 02-04-2021, 06:36 AM
SCAudiophile SCAudiophile is offline
Guest
 
Join Date: Sep 2016
Location: Greenville SC
Posts: 4,531
Default

Thank you guys!
Reply With Quote
  #6  
Old 02-27-2021, 09:07 PM
Timobi Timobi is offline
Guest
 
Join Date: Aug 2016
Location: Monroe, LA
Posts: 606
Default

Excellent write up Mark! Well done.
Reply With Quote
  #7  
Old 02-27-2021, 09:29 PM
Antonmb's Avatar
Antonmb Antonmb is offline
Senior Member
 
Join Date: May 2011
Location: Northwest Washington (Mt Baker foothills)
Posts: 9,121
Default

Great reports Mark.
__________________
Tony
D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2
Reply With Quote
  #8  
Old 02-28-2021, 12:18 AM
SCAudiophile SCAudiophile is offline
Guest
 
Join Date: Sep 2016
Location: Greenville SC
Posts: 4,531
Default

Thanks guys...it continues to be a great performing cable!
Reply With Quote
  #9  
Old 03-01-2021, 10:46 AM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,916
Default

Quote:
Originally Posted by SCAudiophile View Post
Originally posted in November 2019:

Shunyata OMEGA QR Power cord (15-amp) recent listening impressions:

I had the good fortune about 2 weeks ago to be given a chance to spend 5 days with an new Shunyat OMEGA QR power cord.

The fit, finish and build quality (including a new SOTA wire-type internally) are truly world-class and eclipse even
the best from Shunyata thus far which is no easy task. The bespoke connectors, use of high grade carbon, flexibility
of the cable are all on a brand new level of excellence! I’m told these improvements will be studied for their application
to future cables as well. The aesthetic is to my eyes, beautiful to look at as well.

In short, the impact of using this cord is truly, no b.s., no exaggeration was mind-blowing to me….this cord is tailor made
for any amplifier, even digital (ICEpower2, etc…) with more modest current draw requirements but easily will maximize
the performance ff any amplifier, Tube, Solid State or Digital (IMHO). It certainly did that here with respect to all the
various amp connects to the wall in my setup that I tried.

I don’t know the topology or the innards of this cable except what has been circulated online thus far. To my listening
tests from the first hour forward out of the box, every single aspects of playback anywhere I plugged it in improved.

As a kicker, I also tried it on the LPSU for my Wavelet Active Crossover & RoomEQ and then on my DAC as well
and heard similar advances.

In every single case, particular and more striking differences for any amplifier and the LPSU for Wavelet, I heard;

- dramatic increase in sound stage definition and size in 3-dimensions

- rock-solid and dramatic increase in imaging performance top to bottom (floor to ceiling) and left to right

- deepening of the sound stage even further behind the walls and out into the room

- better performance and pacing of all playback, more immediacy and realism in the presentation of the most subtle to the most demanding dynamics in all sorts of music

- improved tonal correctness and ‘color of sound’ (hearing the different materials for drum heads, stick and mallet types, brushes, bows, etc….gold/silver/brass/no finish on trumpet, sax, etc…guitar, piano, violin and bass (double and electric) all rendered in an utterly real and transparent/correct way

- immediacy and pacing of the music; ultra-correct and realistic

- tightness and correctness of the image and improved ability to locate instruments, voices, etc….both individually and in ensemble and have them be what seems to see to be a more correct sizing

Frankly, I expected improvement, bigger in some areas than in othheers but what I heard amazed me as this cord pushed so many areas up on the
scale of playback quality simply through attaching it to one device at a time that I was and still am, shocked by what I heard.

From a ‘power conditioner’ point of view, this has just the right amount of QR/BB for noise elimination the right amount of
current flow and increased dynamic ability for current draw and whatever else amps and LPSUs need to sound their absolute
best.

In short, the most amazing single power cord + conditioning all in one cable for current-draw needs for amps of all kinds
(Even digital amps embedded in active speakers by the way) and LPSUs driving other core components. The effects and sound
quality improvements are not subtle and you won’t have to wait to hear them. The only way to equal it or better would be to be
fortunate enough to have individual TYPHON QRs for each amplifier you have and go 1:1 as is the case with a good friend
here who has 3 TYPHON QRs believe it or not (1 to drive his TRITON V3 and 1 each for his mono blocks)
and is very fortunate and flying in very rarefied airspace as it were !!!

Obvious questions answered:

Going forward at least until Caelin beats the combination, the TRITON V3 and TYPHON QR for transport, DAC, master clock
and pre-amp/processors to me is still the bar for top performance for non-amplifier and non-LPSU devices The OMEGA is excellent
when powering these devices however to my ears I will keep front-end devices plugged into the TRITON V3 and TYPHON QR.

For amplifiers of all types and LPSUs, the OMEGA QR is the cable to beat at its price point and much higher one for direct-to-wall connections.

I will be watching for the cascade of lessons learned in perfecting this OMEGA QR power cord to be brought to
future releases of other cords at more moderate price points rumored to be in the brainstorming process.

One word not the price of the OMEGA QR: yes, it a new price range for Shunyata for a pc; having heard many others at equal
and even higher price points, all of those vendors should be quite worried about what Caelin and team have packed into this
OMEGA QR and the Uber-musical results at a high, but responsible price.

Caelin and the team at Shunyata are ‘on a roll’ doing what I would say and I have heard in musical result is the best work of their careers!

I am grateful I had the opportunity to demo this cord for a few days. It was truly painful to put it in the box and ship
it off to the next destination!!!
A great write-up, Mark. I have not heard the Omega QR on amps, but I had the Omega XC in for a spell for some photography, and first used it with my Everest, and it is an absolutely amazing cable for power distributors. Hearing what the Shunyata QR/BB device does in Everest, I can only imagine the benefits it brings to the Omega QR PC. The QR technology is really a fundamental breaktrhough, in my experience. The Omega XC used on the Everest gave the sense of complete effortlessness and dynamic power when using it in that application. And that immediacy as you, say. A beast of a cable, but amazing as well.

It also looks very cool with the silver carbon fiber plug....

__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.

Last edited by Puma Cat; 03-01-2021 at 10:57 AM.
Reply With Quote
  #10  
Old 03-01-2021, 11:10 AM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,916
Default

Quote:
Originally Posted by SCAudiophile View Post
And bringing things up to the current day...

Circling back on the original write-up I did on Omega QR pre-production "first article" review and having had the good fortune
to obtain a production version of the cable several months ago and be living with it ever since, I repeated all prior component,
amplifier, processor and pre-amp testing configurations for several weeks at a time with the latest Omega QR power cable.

The original impressions and detailed listening results I perceived are still accurate and what I've found after several months
this cable delivers in ample amounts across the entire listening spectrum. I've not had the good fortune to be able to move to
an Omega XC for my Typhon QR with matching Omega XC umbilical but an hoping to move up from Sigma umbilical, etc...soon!

Many months later, the following are still my leading perceptions compared to all prior and current Shunyata Alpha and Sigma v1 and v2 cables, across every genre of music in my collection ;

- dramatic increase in sound stage definition and size in 3-dimensions

- rock-solid and dramatic increase in imaging performance top to bottom (floor to ceiling) and left to right

- deepening of the sound stage even further behind the walls and out into the room than ever before

- dead quiet, ultra-black backgrounds....

- better performance and pacing of all playback, more immediacy and realism in the presentation of the most subtle to the most demanding dynamics in all sorts of music

- improved tonal correctness and ‘color of sound’ (hearing the different materials for drum heads, stick and mallet types, brushes, bows, etc….gold/silver/brass/no finish on trumpet, sax, etc…guitar, piano, violin and bass (double and electric) all rendered in an utterly real and transparent/correct way

- immediacy and pacing of the music; ultra-correct and realistic

- tightness and correctness of the image and improved ability to locate instruments, voices, etc….both individually and in ensemble and have them be what seems to see to be a more correct sizing

- "simply sounds like great music", most audiophile hyperbole/typical wording no longer needed

A fantastic cable!!!
More great information, Mark.

If you have the means, you should try out the Omega QR-S on your Esoteric D-D2 DAC. Thinner and easier to route than the Omega QR, it's the perfect Omega QR PC for source components. It brings all the attributes and qualities you describe for the Omega QR for amps, etc., to source components e.g. DACs, phono stages, etc. Really amazing and "totally bad-*ss" as all the Omega series of cables are.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 08:29 AM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video