|
Shunyata Research Designing Silent Systems for recording, film and music |
|
Thread Tools | Display Modes |
#61
|
||||
|
||||
Shunyata delivery and first impressions
Looking good Mitch. Re the Omega being loose in the outlet, that shouldn’t happen unless the outlet has had a hard life and is worn out already. You may want to check with Shunyata.
Is the white cable a speaker cable, and if so, is that Sigma as close to it as it looks in the photo? If so, you may want to separate them.
__________________
Tony D'Agostino Momentum S250 MxV & HD pre; Linn Klimax Organik DSM, SonicTransporter, EtherRegen; Acoustic Signature Typhoon Neo, Koetsu RSP, Boulder 1108; Sf Il Cremonese; Shunyata Everest, Altaira, Sigma & Alpha v2 |
#62
|
|||
|
|||
Quote:
The outlet is new as far as I know...I’m gonna get a Furutech NCF cradle to prop up the cord so it has a straight run into the outlet. Woulda been nice not to have to do this but it is what it is... The white cord is a speaker cable. Once the Everest gets here I’ll do some cable management...what I have in mind is gonna make it hard to get behind the rack, so gotta wait til I’m close to end state... Thanks, Mitch Last edited by Native Vermonter; 02-23-2021 at 09:13 PM. |
#63
|
|||
|
|||
In the US you can get Shunyata CopperConn outlets I believe. Those are much more secure/tight fit. But I agree on the Furutech NCF booster's they make it pretty easy.
|
#64
|
|||
|
|||
Quote:
I’ll have squeezed out every electron I can at that point. |
#65
|
|||
|
|||
|
|
|
Audio Aficionado Sponsors | |