![]() |
#1
|
|||
|
|||
![]()
After five-years of concerted research and development, an effort that has refined our existing designs and practices as well as introducing entirely new and unique materials, the revolutionary SAFIR 9 tonearm is finally ready for launch. A significant step forward in performance, tour new flagship tonearm will be shown for the first time at the Munich High-End Show in May 2022.
The Safir 9’s most obvious feature and the heart of the design is its conical sapphire arm tube. This provides the cartridge with unprecedented stability, delivering optimum electro mechanical performance from the generator. Extremely rigid, this tube is stiffer and offers a higher resonant frequency than any arm tube ever previously used. It's first break-up mode occurs at over 5KHz, providing the cartridge motor with a true mechanical ground. Due to the use of a sapphire tube, this is a high effective mass tonearm! The bearings are a further development of our own, proprietary 4Point design, the four contact spikes being located in sapphire/ruby receptacles. These ensure rigid, friction-free coupling of the tonearm to its mount, allowing the headshell to move, freely and precisely on the optimum path across the record. The sapphire tube and bearings are fitted into massive solid aluminium and brass blocks, whose inert support helps dissipate the mechanical vibration generated during playback. The double brass counterweight (with locking mechanism) allows extremely precise application of VTF, while azimuth can also be precision adjusted in small, repeatable increments with zero play. The use of the sapphire armtube makes this an high effective mass tonearm, suitable for low compliance cartridges only. The tonearm is mounted to the turntable's arm board using the Kuzma arm base. Arm height is adjusted with a fine VTA screw which controls the height of the tonearm's pillar in the arm base, allowing allows precise and repeatable adjustments whenever required. The internal wiring uses special silver alloy wires that run, unbroken from the cartridge pins via a 1.5 m long tonearm cable to the silver RCA connectors. SAFIR 9 reveals the ultimate potential of your cartridge, revealing musical detail, nuance and expression previously hidden in your record's grooves. Move up to the SAFIR 9 and you suddenly discover not just a whole new record collection, but that the music and musicians you've always loved are even better than you realized! Technical data: Effective length: 229 mm (9 inch) Mounting distance: 212 mm Offset angle: 23 deg Effective mass: 60 g! (Suitable for cartridges with CU below 25) VTA adjustment: yes Azimuth adjustment: yes Bias adjustment: yes Cables: silver (Kondo) Arm mount: Kuzma arm base 212 mm Mass: 1250 g Informative price: 20.000 EUR |
#2
|
||||
|
||||
![]()
You buying?
![]()
__________________
McIntosh MA8000; McIntosh MC1502; Canton Vento Reference 1 DC; E.A.T. E-Flat; Soundsmith Paua Mk II; Technics SL 1210 MK5; Audio Technica AT-150 MLX; Tascam BR-20; Teac X1000R; Pioneer RT-707; Oppo UDP 205; Denon DCD A-100; HP All-In-One Touchscreen Server; JRiver MC 28; Woo Audio WA6; Shure SRH 1840; SVS SB 1000; Jolida 502BRC; Jolida JD9; VPI 16.5 RCM; Wireworld Oasis 8 Speaker Cables; Audoquest Columbia 72 DBS IC's; Panamax PM-5400 (source components only) |
#3
|
|||
|
|||
![]()
Probably not, but J. Sikora (my TT) loves the Kuzma 4 PT. J. Sikora himself ran a Kuzma 4 PT on his Sikora TT until he developed his own tonearm (Sikora KV-12). So I do desire to give it a listen as this is supposed to be the new Kuzma Flagship.
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Audio Aficionado Sponsors | |