Do you connect your amp to your power conditioner?

[miner]

I have my mc452 plugged into my P5 regenerator.

[MasterLuJr]

My Krell is plugged into my Shunyata Denali

[crwilli]

My MC2301s are plugged into a PSAudio P10 and the P10 into a dedicated 20 Amp line.

[tjarmstrong]

My MC542 is plugged into my Transparent Powerisolator MM2 on a dedicated 20A circuit. I've tried to go without it but it just doesn't sound as good.

[cleeds]

I use a pair of Tice Power Blocks/Titans on each of my two amplifiers, with each Tice pair on its own dedicated derated 20A circuit. Lotsa clean power! Amplifiers include Bryston 4B, ARC D300 and Conrad Johnson Premier 1B.

[djwhog]

yes on all 601s and 452 amps

[Wasatch]

Yes to the Running Springs Audio Elgar.

[Sharp 1080]

However since moving and having a dedicated room I changed things around. I now have my five Theta monoblocks plugged into dedicated 20A outlets. The outlets were installed just for my amplifiers and JL Audio subwoofers only. I do have all of my front end gear on a Transparent Power Isolator MM2 on a separate outlet system.

[homey]

Yes I have my Pass Labs 250.5 plugged in to a p10

[SCAudiophile]

Refining earlier post to make it more clear, the short answer is 'yes';

Esoteric A-02 Stereo Amp directly into an Isotek EVO3 TITAN

HDPlex Linear, Regulated DC supply into the 2nd outlet on the TITAN

Isotek EVO3 SIGMAS tethered (via Neutrik Powercon) to the TITAN

TITAN+SIGMAS than act as one unified power conditioner....

Legacy AERIS 1000-watt ICE amps in each speaker directly into the SIGMAS

With IsoTek, I definitely recommend amps into a power conditioner.