|
Stillpoints Lower Your Noise Floor |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Stillpoints meet MCD500 - What a revelation
Controversy coming even before one word is typed.
First the bad news or at least the most shocking revelation -- in getting the MCD500 ready for the transformation, I removed the stock feet and about had a heart attack -- the stock feet are molded plastic and weigh in at 17.6g (1/2 ounce or so). For a well made player that the MCD500 is; for heavens sake folks, get something better for vibration control such as Rollerballs, Fatz Pads, Stillpoints, Harmonix footers under that fine unit. Okay, so what did I notice? Well, to set the stage, I've been playing the same two CD's over and over this morning prior to the installation of the Stillpoints. On DK's CD's and Jennifer Warnes, The Hunter, the notes are without a doubt an improvement, even though slight, in detail and articulation. Pics of the stock feet against the heavy, metal constructed MC2301 footers. Next project -- Stillpoints under the C500P (which supports the C500T) and under the MT10 (I tried a Ginko Cloud 11 and noticed when I tapped on the platform, a thud would amplify thru my speakers -- so, it was removed). Bob
__________________
Amps:VAC 450iQ Monos in Silver Flake on HRS M3X2-1921's, HRS G7 Footers/G-Links & Sound Anchor Conecoasters. Preamp:VAC Statement (on order) (Silver Flake) Digital Source: dCS Rossini CD/SACD Transport, Vivaldi APEX DAC, Upsampler Plus & matching Clock (Silver) Analogue Preamp:VAC Renaissance SE Phono stage in Silver Flake with XLR Output Option & with Nordost Valhalla XLR's. Analogue Sources:SME 20/2 w/SME V arm & Nordost Odin 2 Tone Arm Cable, Palo Santos Presentation Cartridge & Akai GX-400D Reel-to-Reel w/relapped heads by JRF Magnetic Sciences. Akai RC-17 cabled remote (original owner since 1974). Vibration Control:TT on HRS M3X2-1921 shelf. Speakers:Wilson Audio Alexia V (on order in Ferrari Argento Silver/Parchment grills sitting on Acoustic Diode Kit). Power Cables:4 Nordost Odin Supreme Reference on amps, preamp & DAC. Ansuz Acoustics C2 on Transport & Clock. Power Distribution:Ansuz Mainz D3 Distributor & Ansuz Mainz C2 1M Power Cable Power Outlets:Furutech GTX-D NCF (R) duplex outlet, GTX Wall Plate & Duplex Cover (x2) on dedicated, same panel phase, 20A breakers. Speaker Cables:2M Nordost Odin 2 Supreme Reference on Nordost Sort Lifts. Signal Cables:Nordost Odin XLR's on dCS DAC & Amps. Digital Cables: Nordost Odin 2's, 110-ohm AES/EBU on dCS Transport to DAC. Clock Cables:5 each 75 ohm 1.25M Nordost Valhalla BNC/BNC Digital Ethernet Cable: WireWorld Platinum 1M Starlight® 8 Twinax Headphones:Vintage Koss Pro IV AA. RCM: Audio Desk PRO Tube Test Gear:Mint late '60's/calibrated Heathkit TT-1A, MaxiMatcher Power Amp & Preamp & Space Tech Labs ATT-3.02 tube test sets. Last edited by vintage_tube; 02-28-2010 at 06:34 PM. |
#2
|
||||
|
||||
Maybe the feet aren't that important if the player was designed from ground up to use them?
__________________
Mike ~Your pet is your best investment~ Preamps/tuners:McIntosh C50, C46, MR88, MR73, C2200, C22ce, Cary SPL-98L Integrate amps:McIntosh MA6100, Denon PMA2000ivr Amps: McIntosh Mc602, Mc2000, Mc275 MK-V, Cary 805ae mono blocks. Speakers: JMLab Mezzo Utopia, Focal Twin6 BE, Tannoy Mini Autograph Headphones: Sennheiser HD800, Beyer T1, Denon D7000, Grado RS1i, Sony MDR-SA5000, MDR-Z1000, AKG K701, and many many more Digital Sources:Sony SCD-1 & SCD777es, CDP-XA7es, 2010 Mac Mini Music Server, Amarra Mini player, Musical Fidelity V-Link & M1 DAC, Apogee Mini-DAC & Duet 2 |
#3
|
||||
|
||||
Mcd500
Bob,
My experience mirrors yours. I long ago removed the stock McIntosh hard plastic feet and slipped 3 Symposium "couplers" under the chasis resting a top a Symposium svelte shelf. I couldnt believe the difference it made versus the hard plastic feet a top the svelte shelf. The already impressive performance of the MCD500 was quite frankly improved to whole 'nother level. Microdynamics and to a lesser extent imaging improved with an apparent blacker background. In other words, the 'resolution' of the system improved without ANY negative effects. I was floored!! This is such an inexpensive tweak, everyone owes to themselves to at least experiment with their favorite isolation/vibration control devices. I will purchase Rollerblock 2+ in the future for the MCD500 and preamp. Jason
__________________
Preamp: McIntosh C1100T/C1100C, McIntosh MX180 Amp: McIntosh MC611 (2), MC601 (3), MI254 Digital: McIntosh D1100, McIntosh MCT450, Meridian 808v6, Aurender N20, Aurender ACS10, Oppo 203 Analog: McIntosh MT10, Hana Umami Red Phono preamp: Simaudio Moon 610LP, 820S Signal cables: WW Gold Eclipse 7 speaker cables; Shunyata Sigma v2 XLR (2); Sigma v1 XLR (2), Transparent Ref XL (MM2) XLR; WW Silver Eclipse 7 (4) Digital cables: Shunyata Omega USB, Omega Ethernet, Sigma Ethernet; WW Platinum 7 Coax, AES/EBU Switch: Innuos PhoenixNet Power: Audioquest Niagara 7000, Audioquest 5000, Audioquest Dragon, Hurricane PC, Shunyata Alpha HC, AQ NRG Edison outlets, (8) 20 amp dedicated lines, 125 amp subpanel Speakers: Wilson Sasha DAW, Dynaudio Contour 30, Dynaudio Contour 25C Subs: REL s/812 (6), REL s/510 (3) Accessories: HRS M3X2 shelf (MT10), Stillpoints Ultra II v2 w/ bases (21), Ultra SS (12), Mini (12), LPi v1 Sound treaments: Artnovion |
#4
|
||||
|
||||
+1
I use Rollerblocks under all sources & pre-amps; excellent tweak for the buck.
__________________
Ivan FLORIDA MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES Reference System: ACCUPHASE A300 AMPS, C3900 PRE-AMP, DP1000 CD/SACD TRANSPORT, DC1000 DIGITAL PROCESSOR, DG-68 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES CAPE COD MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1X/D1X STACK, G1X RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS(4), BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) ALTAIRA CG & SG HUBS, AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES |
#5
|
||||
|
||||
I have quite a few (couple dozen + ) sets available, but you have to see my thread on the appropriate forum: http://audioaficionado.org/selling/2...nt-stands.html.
Thanks, Neil |
#6
|
|||
|
|||
BDR Cones on McIntosh Components
Here's another option: use Black Diamond Racing (BDR) Cones. You need the following: four 10-32 x 1/4-20 Adapters and four BDR Cones (available from Music Direct) per component. I've replaced the stock McIntosh feet on my MCD500, MEN220, C1000T & C1000 Controller. An advantage of the BDR Cones is they allow you to level a wobbly component. For example, my MEN220 chassis is slightly warped and it's a simple matter to adjust the appropriate BDR Cone/Adapter assembly to compensate. My MCD500 sits on a HRS Isolation Base (Granite); my MEN220 sits on a glass shelf and my C1000 pair sit on individual BDR 'Shelf' (Carbon Fibre) units. One thing to watch out for: the modified units slide very easily so take care when you're connecting the cables!
I plan to change out the stock McIntosh feet on my MR85 and then my MC2301 monoblocks. |
#7
|
||||
|
||||
I put 3 stillpoints under each cj ART3 chassis last week and the resulting clarity and focus brought to the entire audio spectrum was a lot more than I expected.
To make sure it was not just the placebo effect I removed them today and listened again. In comparison the bass was a little overblown and the rest of the audio spectrum a little well blurred. Of course I am slightly exaggerating, but the difference was easy to hear. I them put the stillpoints back and the focus and clarity returned. BTW, these are just the stillpoints, not with the footers, couplers etc which are supposed to be better again. I have used a number of footers in the past - Aurios and rollerblocks , but the stillpoints to my ears are a lot better. Stillpoints also do not rock like a drunken sailor, stillpoints do not. I still use the Aurious on one of my phono stages, but it is a PITA. highly recommended |
#8
|
|||
|
|||
Quote:
|
#9
|
||||
|
||||
Bill.......Coffee and Kahlua for breakfast?
__________________
Dan STUDIO - McIntosh C1000C/P, MC2301 (2), MR88, Aurender N10, Esoteric K-01X, Shunyata Sigma spdif digital cable, Sonos Connect, PurePower 2000, Stillpoints, Furutech Flux 50, Michell Gyro SE, Michell HR Power Supply, SME 309, Ortofon Cadenza Black, Wireworld, Sonus faber Amati Anniversario LIVING ROOM - McIntosh C2300, MC75 (2), MR85, Magnum Dynalab 205, Simaudio MOON Neo 260D-T, Schiit Audio Yggdrasil, Aurender N100H, Shunyata Sigma USB cable, Micro Seiki DD40, Ortofon Cadenza Blue, Nakamichi BX-300, Sony 60ES DAT, PS Audio P10, Furutech Flux 50, Sonos Connect, Stillpoints, Wireworld, Kimber, PMC EB1i, JL Audio f113 VINTAGE - McIntosh MA230, Tandberg 3011A tuner, Olive 04HD, Sony DTC-59ES DAT, McIntosh 4300V, JBL 4312A |
#10
|
|||
|
|||
I have used pulsar points under my pre and power (both tube) and it made a massive improvement. Great cheep upgrade.
|
|
|
Audio Aficionado Sponsors | |