AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Shunyata Research

Shunyata Research Designing Silent Systems for recording, film and music

Reply
 
Thread Tools Display Modes
  #101  
Old 07-14-2021, 10:31 PM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
conrad-johnson, baby!


 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 9,856
Default

Quote:
Originally Posted by audioquest4life View Post
Joining the Sigma NR2 club. After reading and waiting in the wings for a while, finally decided to reach out to the one and only “Masterlu”:and order a quad of the Sigma NR2s which will plug into my McIntosh MC2301 amps and my dual power supply Aesthetix Eclipse phono stage.

Will provide updates and impressions once they arrive. These will be an upgrade from Shunyata Black Mamba’s and Anacondas that I have been using for years.

Question: I have a set of B&K Precision 1621A power supplies that power the field coils on my Classic Audio T1.5 speakers. I am using regular power cords but have the urge to upgrade those if it is a viable thing to do. And if so, what Shunyata power cords would be good for those power supplies?

Link here: https://www.bkprecision.com/products...er-supply.html

Thanks in advance.
Given the B&K's do the conversion to DC to power your field coils, I'm thinking something along the lines of the Venom NRv10 might be a good bet for the power supplies.
__________________
First Sound Presence Deluxe 4.0 MkIII-Si Paramount Special Edition preamp, Conrad-Johnson LP70S amp, Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion w/ EAR324, Oppo BD-83SE, Sonore OpticalModule with Uptone Audio LPS-1.2 power supply, Uptone Audio EtherREGEN, SOtM UltraNeo with Keces P3 power supply, Shunyata Omega & Sigma Ethernet, Alpha USB digital cables, Lampizator Baltic 3 DAC, Mac Mini/Roon, Harbeth 30.2 or Dynaudio Contour S3.4 w/ Esotar 2 tweeters, REL R-305, Shunyata Alpha V2 ICs, Shunyata Alpha V2 speaker cables, Shunyata Sigma XC, Sigma NRv2, Alpha NRv2, Alpha XC, Delta NR v2, and Venom V14D power cords, Shunyata Everest 8000
Reply With Quote
  #102  
Old 07-15-2021, 03:30 AM
tima tima is offline
Living La Vida Vinyl
 
Join Date: Mar 2010
Posts: 1,271
Default

Quote:
Originally Posted by SCAudiophile View Post
Something is definitely about to happen w.r.t. Signal Grounding at Shunyata; check out the "Grounding" tile on the Shunyata home page.

More after the official products introduction.
Altaira GP-NRC w/ tiered grounding cables, Venom through Omega
Reply With Quote
  #103  
Old 07-23-2021, 09:58 PM
RRibeiro RRibeiro is online now
Junior Member
 
Join Date: Aug 2017
Location: Portugal, Oeiras
Posts: 6
Default What best next step?

Quote:
Originally Posted by CGabriel View Post
...
So, it really comes down to how much are you willing to invest in the power system. I like what Crion had to say. All good advice, especially upgrading the Tv3 and TQR cables to Alpha XC or Sigma XC. That will be a huge step forward. I will give you a couple of levels to consider if and when you decide to upgrade the component power cords. This all assumes that you live in the US or Canada??

Good Performance to Cost Ratio
Avid turntable - Venom V14 Digital
BAT phono - Alpha v2 NR
BAT integrated - Alpha v2 NR
Subs - Delta v2 NR

Better Performance - harder on the wallet
Avid turntable - Venom V14 Digital
BAT phono - Sigma v2 NR
BAT integrated - Sigma v2 NR
Subs - Alpha v2 NR
........

Dear Gabriel, (or whoever may comment)

I've been a long time enthusiast and happy adopter of Shunyata PCs.
Although using a PS Audio 10, I also plan to evaluate an Everest probably next year. Eventually keep both.
I have been upgrading slowly my several PCs, as the budget allows me. Would you be kind to advise me which should be the next upgrade step? so as confirm if my current layout is the most adequate in order to get the most of my ( different grade and models) Shunyata loom?
- PS10 Conditioner - Sigma NR
- ARC Ref6 Pre - Sigma NR
- ARC Ref3 Phono - Python CXA
- ARC GS150 Amp - Alpha HC
- Wadia Si7 DAC/CD - Alpha NR v2 ( the newest)
- LPS Hypsos / Nucleus Roon - Alpha Digital
- LPS / Bergman Turntable - Absolute Power15 Furutech (the only not yet Shunyata
Reply With Quote
  #104  
Old 07-23-2021, 11:15 PM
Masterlu's Avatar
Masterlu Masterlu is online now
AA Founder, Legend AV Owner



 
Join Date: Apr 2009
Location: South FL & Cape Cod MA
Posts: 74,435
Default

RRibeiro… Welcome to AA!
__________________
Ivan
FLORIDA
MX136, MC1.2KW(10) MC2KW(2), MCD1100, MS750(2) MVP881, C1000C/P/T, MPC1500, HT-2 SUBS(2) HT3F(2) WS350(2) XRT2K, XCS2K, XR27(2) XCS350(2) JL GOTHAM v2 SUBS(2) SILENZIO MUSIC SERVER, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" MOTORIZED SCREEN, CINEMA-TECH SEATING, WW PLATINUM CABLES
Reference System: ACCUPHASE A250 AMPS, C3850 PRE-AMP, DP950 CD/SACD TRANSPORT, DC950 DIGITAL PROCESSOR, DG-58 DIGITAL EQUALIZER, T1200 FM STEREO TUNER, PS1230 POWER SUPPLY, HRS-SXR CUSTOM RACK w/ M3X SHELVES, TAD REFERENCE ONE MK2 LOUDSPEAKERS, WW PLATINUM CABLES
CAPE COD

MX150, MC501(2) MC1.2KW(10) MC2301(2) MR88, MVP881, MCD1100, MDA1000, C1000C/P/T, MPC1500, ESOTERIC K-01X 30th ANNIVERSARY (BLACK) SACD/CD PLAYER, G02-X CLOCK, HT3F(2) XRT2K, XCS2K, XR27(2) JL GOTHAM v2 SUBS(2) JL FATHOM F113v2 SUBS(4) SOUND ANCHOR STANDS(2) KALEIDESCAPE STRATO & TERRA SERVERS 80-TB, LUMAGEN RADIANCE SCALER, SONY VPH-G90U 4K PROJECTOR, STEWART 120" SCREEN, SONUS FABER STRADIVARI, SILENZIO MUSIC SERVER, FORTRESS SEATING, WW PLATINUM CABLES
Analog Rig: CLEARAUDIO INNOVATION WOOD, UNIVERSAL ARM w/ Da VINCI' CART, 2nd UNIVERSAL ARM w/ GOLDFINGER STATEMENT CART, HRS-MXR REFERENCE RACK-GLOSS BLACK w/ M3X SHELVES, AESTHETIX RHEA SIG PHONO-PRE, BRYSTON BHA-1 HEADPHONE AMP, WW PLATINUM CABLES
Reference System: BURMESTER 911MK3 AMP(3), 088 PRE-AMP, 089 CD PLAYER, 100 PHONO PRE-AMP, 948 POWER CONDITIONER, ACCUPHASE DG-68 VOICING EQUALIZER, AVID ACUTUS REFERENCE SP TT, GRAHAM PHANTOM II SUPREME ARM, BENZ MICRO LP-S CART, GRANDIOSO P1/D1 STACK, G1 RUBIDIUM MASTER CLOCK, N05 NETWORK PLAYER, SILENZIO MUSIC SERVER, HRS-SXR CUSTOM RACK w/ M3X SHELVES, SONUS FABER AIDA SPEAKERS, JL FATHOM F113v2 SUBS(2) SOUND ANCHOR STANDS(2) WW PLATINUM CABLES

Library System: GRANDIOSO M1 MONOBLOCK AMPS, C1 LINESTAGE PRE-AMP, K1X CD/SACD PLAYER, G1 MASTER RUBIDIUM CLOCK, E02 PHONO-PRE, SILENZIO MUSIC SERVER, AERIAL ACOUSTICS 20T V2, AERIAL SW12 SUBS(2), CANTON REF K1’s, VPI HRX TT w/ SDS POWER SUPPLY, ORTOFON CADENZA BLACK CART, KLAUDIO RCM, SHUNYATA DENALI 6000/S v2, SHUNYATA OMEGA QR’s, WW PLATINUM CABLES
Esoteric/Bryston System: ESOTERIC C02-X PRE-AMP, P-02X TRANSPORT, D02-X DAC, G02-X CLOCK, BRYSTON 28B3 CUBED MONOBLOCK AMPS, BRYSTON BHA-1 HEADPHONE AMP, SHUNYATA DENALI 6000/S v2(2) EVEREST 8000 POWER CONDITIONER(2) AMR-DP777-SE DAC, SILENZIO MUSIC SERVER, TAD REFERENCE ONE MK2 LOUDSPEAKERS, QUADRASPIRE RACK, WW PLATINUM CABLES
Accuphase/Canton System: ACCUPHASE E800 INTEGRATED, DP570 CD/SACD PLAYER, T1200 FM STEREO TUNER, DG-68 VOICING EQUALIZER, PS530 POWER SUPPLY, CANTON REF K3’s, CANTON REF K5’s, SILENZIO MUSIC SERVER, HRS MXR REFERENCE MAHOGHANY RACK w/ M3X2 SHELVES, WW GOLD CABLES
Bryston Active System: BP26 PRE-AMP, MPS2 POWER SUPPLY, BAX-1 CROSSOVER, BDA-3 DAC, BDP-3 PLAYER, BCD-3 CD PLAYER, BIT15(2), MODEL T ACTIVE SPEAKERS, 21B3 CUBED AMPS, SILENZIO MUSIC SERVER, TARGET RACK, WW SILVER CABLES
Vintage System
: LUXMAN CL-38u SE PRE-AMP, JBL L300 SPEAKERS, BRYSTON BDA-3 DAC, BCD-3 CD PLAYER, BIT15, 3B3 CUBED AMP, SILENZIO MUSIC SERVER, WW SILVER CABLES

Shunyata Power/Digital cables, HRS Damping Plates, Stillpoints throughout all systems
Reply With Quote
  #105  
Old 07-24-2021, 03:32 PM
RRibeiro RRibeiro is online now
Junior Member
 
Join Date: Aug 2017
Location: Portugal, Oeiras
Posts: 6
Default What is the best place to get the most from the Venom 12 NR

Quote:
RRibeiro… Welcome to AA!
Thanks Masterlu

Indeed I really like this forum, find it very informative, in a deep and polite way.
I find Puma Cat, Gabriel Caelin, so as many other members, pros or just audiophiles, really helpful in a friendly way rare to others pages I also follow.

Perhaps someone coud give me a tip.
I am, step by step, upgrading my Shunyata pc loom.
I already got an Alpha NR v2 that alocate to my CD/DAC Wadia S7i, one that Puma Cat knows well from their more old reviews, and ordered a Venom 12 NR that I would like some advice where it may better applied?
on the Hypsos/Nucleus Roon that is coming from the PS10?
or to feed the LPS/TT Bergman that is currently coming from a separate wall mains outlet?

- PS10 Conditioner - Sigma NR
- ARC Ref6 Pre - Sigma NR
- ARC Ref3 Phono - Python CXA
- ARC GS150 Amp - Alpha HC
- Wadia Si7 DAC/CD - Alpha NR v2 ( the newest)
- LPS Hypsos / Nucleus Roon - Alpha Digital
- LPS / Bergman Turntable - Absolute Power15 Furutech (the only not yet Shunyata

Last edited by RRibeiro; 07-24-2021 at 04:25 PM. Reason: Details missing
Reply With Quote
  #106  
Old 07-24-2021, 06:37 PM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
conrad-johnson, baby!


 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 9,856
Default

Quote:
Originally Posted by RRibeiro View Post
Thanks Masterlu

Indeed I really like this forum, find it very informative, in a deep and polite way.
I find Puma Cat, Gabriel Caelin, so as many other members, pros or just audiophiles, really helpful in a friendly way rare to others pages I also follow.

Perhaps someone coud give me a tip.
I am, step by step, upgrading my Shunyata pc loom.
I already got an Alpha NR v2 that alocate to my CD/DAC Wadia S7i, one that Puma Cat knows well from their more old reviews, and ordered a Venom 12 NR that I would like some advice where it may better applied?
on the Hypsos/Nucleus Roon that is coming from the PS10?
or to feed the LPS/TT Bergman that is currently coming from a separate wall mains outlet?

- PS10 Conditioner - Sigma NR
- ARC Ref6 Pre - Sigma NR
- ARC Ref3 Phono - Python CXA
- ARC GS150 Amp - Alpha HC
- Wadia Si7 DAC/CD - Alpha NR v2 ( the newest)
- LPS Hypsos / Nucleus Roon - Alpha Digital
- LPS / Bergman Turntable - Absolute Power15 Furutech (the only not yet Shunyata
Hi RRbiero,
Given your current set of Shunyata cables, I think you've got the right cables on the component for the most part, but I think by swapping some cables around, you may get optimal performance.

Here's what I would try if I had your components and cables:

- PS10 Conditioner - Sigma NR
- ARC Ref6 Pre - Alpha NR v2 ( the newest)
- ARC Ref3 Phono - Python CXA
- ARC GS150 Amp - Sigma NR
- Wadia Si7 DAC/CD - Alpha Digital
- LPS Hypsos / Nucleus Roon - Venom NR v12
- LPS / Bergman Turntable - Alpha HC

Try these and see if you think this setup works better.

If you have the budget in the future, I'd recommend a getting Shunyata Sigma XC for your PS10 (later put it on your Everest when you get it). Then, I'd put the Sigma NR that was on he PS10 on the Ref 6 pre, and the Alpha NRv2 on the Wadia.

If down the road, you want to upgrade the PCs on the Ref 3 Phono and LPS/Bergman turntable, I'd suggest the Delta NRv2 and Venom NRv10 on these, respectively.
__________________
First Sound Presence Deluxe 4.0 MkIII-Si Paramount Special Edition preamp, Conrad-Johnson LP70S amp, Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion w/ EAR324, Oppo BD-83SE, Sonore OpticalModule with Uptone Audio LPS-1.2 power supply, Uptone Audio EtherREGEN, SOtM UltraNeo with Keces P3 power supply, Shunyata Omega & Sigma Ethernet, Alpha USB digital cables, Lampizator Baltic 3 DAC, Mac Mini/Roon, Harbeth 30.2 or Dynaudio Contour S3.4 w/ Esotar 2 tweeters, REL R-305, Shunyata Alpha V2 ICs, Shunyata Alpha V2 speaker cables, Shunyata Sigma XC, Sigma NRv2, Alpha NRv2, Alpha XC, Delta NR v2, and Venom V14D power cords, Shunyata Everest 8000
Reply With Quote
  #107  
Old 07-25-2021, 07:15 PM
RRibeiro RRibeiro is online now
Junior Member
 
Join Date: Aug 2017
Location: Portugal, Oeiras
Posts: 6
Default

Quote:
Originally Posted by Puma Cat View Post
Hi RRbiero,

Here's what I would try if I had your components and cables:

- PS10 Conditioner - Sigma NR
- ARC Ref6 Pre - Alpha NR v2 ( the newest)
- ARC Ref3 Phono - Python CXA
- ARC GS150 Amp - Sigma NR
- Wadia Si7 DAC/CD - Alpha Digital
- LPS Hypsos / Nucleus Roon - Venom NR v12
- LPS / Bergman Turntable - Alpha HC

Try these and see if you think this setup works better.

If you have the budget in the future, I'd recommend a getting Shunyata Sigma XC for your PS10 (later put it on your Everest when you get it). Then, I'd put the Sigma NR that was on he PS10 on the Ref 6 pre, and the Alpha NRv2 on the Wadia.

If down the road, you want to upgrade the PCs on the Ref 3 Phono and LPS/Bergman turntable, I'd suggest the Delta NRv2 and Venom NRv10 on these, respectively.
Really thankful for your wise advise Puma Cat.
Indeed I also thought next step should be a Sigma XC (NR v2 technology...) for the Conditioner (either PSA 10 or Everest). And I think I understand and agree with your aparent rationale putting the more recent Shunyata on the most important pieces, like conditioner (being the first on the line), the Pre, and the Power. Am I right?

Unfortunaly, I forgot to mention that both pres and power from ARC, have a C19 connector so as the cables that currently feed them. Even so, I will try to follow your optimised proposed layout, through an SR adapter for the (not so critical) LPS on the TT, and the not so easy to solve Alpha NR v2 for the Ref6 Pre...
Would it be worth to get an SR adapter C15->19 in order to put the Alpha NR v2 on the Pre Ref6?

- PS10 Conditioner (C15) - Sigma NR (C15)
- ARC Ref6 Pre (C19) - Alpha NR v2 (C15) *** Problem, adapter C15->19?? ***
- ARC GS150 Amp (C19) - Sigma NR (C19)
- Wadia Si7 DAC/CD (C15) - Alpha Digital (C15)
- Nucleus Roon / LPS Hypsos (C15) - Venom NR v12 (C15)
- ARC Ref3 Phono (C19) - Python CXA (C19)
- LPS / Bergman Turntable - Alpha HC (C19) / through adapter 19->15
__________________
Wilson Audio DAW, ARC Ref6, Ref3 Ph, GS150, Wadia s7i, Nucleus Roon (Hypsos), Bergman Magne TT (LPS) / Lyra Delos. TA Opus g5 SC, KK Select AG ICs, PS Audio 10, Shunyata Sigma NR, Alpha NR v2, HC, Digital, Python CXA PCs, FT-SWS outlets. Ww Platinum Silver Ethernet, KK Select AG USB, SOTM sNH-10G switch w/ iFi ps, QNAP NAS w/ Elite iFi. Emporium/Pagode FE Racks, Herbies Rings, Sort Kones DC/TC, Ceraball, N. Gritty.
Reply With Quote
  #108  
Old 07-26-2021, 03:08 PM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
conrad-johnson, baby!


 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 9,856
Default

Quote:
Originally Posted by RRibeiro View Post
Really thankful for your wise advise Puma Cat.
Indeed I also thought next step should be a Sigma XC (NR v2 technology...) for the Conditioner (either PSA 10 or Everest). And I think I understand and agree with your aparent rationale putting the more recent Shunyata on the most important pieces, like conditioner (being the first on the line), the Pre, and the Power. Am I right?

Unfortunaly, I forgot to mention that both pres and power from ARC, have a C19 connector so as the cables that currently feed them. Even so, I will try to follow your optimised proposed layout, through an SR adapter for the (not so critical) LPS on the TT, and the not so easy to solve Alpha NR v2 for the Ref6 Pre...
Would it be worth to get an SR adapter C15->19 in order to put the Alpha NR v2 on the Pre Ref6?

- PS10 Conditioner (C15) - Sigma NR (C15)
- ARC Ref6 Pre (C19) - Alpha NR v2 (C15) *** Problem, adapter C15->19?? ***
- ARC GS150 Amp (C19) - Sigma NR (C19)
- Wadia Si7 DAC/CD (C15) - Alpha Digital (C15)
- Nucleus Roon / LPS Hypsos (C15) - Venom NR v12 (C15)
- ARC Ref3 Phono (C19) - Python CXA (C19)
- LPS / Bergman Turntable - Alpha HC (C19) / through adapter 19->15
The adapter would work. A better solution would be to contact Shunyata and see if they would re-terminate the Alpha NR v2 to C19 for you.
__________________
First Sound Presence Deluxe 4.0 MkIII-Si Paramount Special Edition preamp, Conrad-Johnson LP70S amp, Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion w/ EAR324, Oppo BD-83SE, Sonore OpticalModule with Uptone Audio LPS-1.2 power supply, Uptone Audio EtherREGEN, SOtM UltraNeo with Keces P3 power supply, Shunyata Omega & Sigma Ethernet, Alpha USB digital cables, Lampizator Baltic 3 DAC, Mac Mini/Roon, Harbeth 30.2 or Dynaudio Contour S3.4 w/ Esotar 2 tweeters, REL R-305, Shunyata Alpha V2 ICs, Shunyata Alpha V2 speaker cables, Shunyata Sigma XC, Sigma NRv2, Alpha NRv2, Alpha XC, Delta NR v2, and Venom V14D power cords, Shunyata Everest 8000
Reply With Quote
  #109  
Old 07-26-2021, 04:19 PM
RRibeiro RRibeiro is online now
Junior Member
 
Join Date: Aug 2017
Location: Portugal, Oeiras
Posts: 6
Default

I will try both ways.
Thanks again for your advise.
__________________
Wilson Audio DAW, ARC Ref6, Ref3 Ph, GS150, Wadia s7i, Nucleus Roon (Hypsos), Bergman Magne TT (LPS) / Lyra Delos. TA Opus g5 SC, KK Select AG ICs, PS Audio 10, Shunyata Sigma NR, Alpha NR v2, HC, Digital, Python CXA PCs, FT-SWS outlets. Ww Platinum Silver Ethernet, KK Select AG USB, SOTM sNH-10G switch w/ iFi ps, QNAP NAS w/ Elite iFi. Emporium/Pagode FE Racks, Herbies Rings, Sort Kones DC/TC, Ceraball, N. Gritty.
Reply With Quote
  #110  
Old 07-26-2021, 05:26 PM
Puma Cat's Avatar
Puma Cat Puma Cat is offline
conrad-johnson, baby!


 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 9,856
Default

Quote:
Originally Posted by RRibeiro View Post
Indeed I also thought next step should be a Sigma XC (NR v2 technology...) for the Conditioner (either PSA 10 or Everest).
The XC power cords not have the noise reduction technology; they are designed to pass maximal current to the power distributor (which has it's own built-in noise reduction).

The Shunyata noise reduction power cords were specifically designed for components. This technology is specifically designed to keep the noise from the components' own internal power supply from escaping into the rest of the power distribution chain and adding noise to other components, most importantly, lower level source components e.g. DACs, phono stages, etc.

A quote from an article by Caelin:
"A primary source of audible sonic degradation is caused by the power supplies in our audio/video components. Most components use FWBR (full wave bridge rectifier) power supplies that generate an incredible amount of transient noise when the rectifiers switch off. The design of a power cable can significantly affect the reactance of these signals within the power supply. The power cable is effectively part of the primary winding of the power transformer. The transition between the various metals used in a power cable and its connectors can cause electromagnetic reflections and diode-like rectification of the noise impulses as they propagate away from the power supply. If the power cable presents a high impedance to these signals they will be reflected back into the power supply where they will intermodulate, thus increasing the high frequency noise levels of the component. Most power supply filters are ineffective at blocking very high frequency noise components and much of it is passed through to the DC rails. The sonic effects of this include: high background noise levels, blurred or slurred transients and a general lack of clarity and purity of the sound or visual image.”
__________________
First Sound Presence Deluxe 4.0 MkIII-Si Paramount Special Edition preamp, Conrad-Johnson LP70S amp, Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion w/ EAR324, Oppo BD-83SE, Sonore OpticalModule with Uptone Audio LPS-1.2 power supply, Uptone Audio EtherREGEN, SOtM UltraNeo with Keces P3 power supply, Shunyata Omega & Sigma Ethernet, Alpha USB digital cables, Lampizator Baltic 3 DAC, Mac Mini/Roon, Harbeth 30.2 or Dynaudio Contour S3.4 w/ Esotar 2 tweeters, REL R-305, Shunyata Alpha V2 ICs, Shunyata Alpha V2 speaker cables, Shunyata Sigma XC, Sigma NRv2, Alpha NRv2, Alpha XC, Delta NR v2, and Venom V14D power cords, Shunyata Everest 8000
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 07:16 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
©Copyright 2009-2021 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Legend Audio & Video
Legend Audio & Video
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Accuphase
Accuphase