AudioAficionado.org  

Go Back   AudioAficionado.org > Manufacturers Forums > Pass Labs

Pass Labs 20 Years and Counting

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2021, 04:43 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,915
Default Pass Labs Class A Amp Warmup Question

Hey gang,
I know many folks here love and enjoy Pass Lab amps.

Some of you may remember I built up two Nelson Pass-designed Amp Camp amps last summer.

I've set these up again over the long Memorial Day holiday weekend to get some real hours on them and on my (also DIY) GR-Research X-LS Encore speakers (which I recently found out need 400 hours of running in), and have an anecdotal observation that they seem to require about an hour of warm-up time to fully come "on song". When I listen to them as soon as I switch them on, they seem to be a bit thin and 2-dimensional sounding. Once they've been on for an hour so, though, they really do sound very good, especially when run as a pair of bridged monos.

Here they are set up on the floor in a quickie set-up configuration (sorry for the quality of the quickie iPhone 12 "snapshot")



Is this observation consistent with your experiences? What do you guys that have a Pass Class A amp typically do? Do you leave the amp on all the time, or fire it up for listening sessions?

Lastly, I'm not telling you guys anything you don't know, but Nelson Pass is a genius.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
  #2  
Old 05-31-2021, 05:49 PM
GSOphile GSOphile is offline
Senior Member
 
Join Date: Jul 2017
Location: NC
Posts: 553
Default

I would look to Kent English at Pass Customer Service for his experience and opinion.
Reply With Quote
  #3  
Old 05-31-2021, 06:07 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,915
Default

Quote:
Originally Posted by GSOphile View Post
I would look to Kent English at Pass Customer Service for his experience and opinion.
Thanks, I know Kent. Cheers.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
  #4  
Old 06-01-2021, 07:12 PM
slowGEEZR slowGEEZR is offline
Guest
 
Join Date: Apr 2011
Location: Colorado Springs
Posts: 1,570
Default

Stephen, I've owned and loved the Pass Labs 100.5s for quite a few years now.I leave the back switch on, but power up with the front switch to listen. They sound fine right off the bat, but sound better by the end of the first record and then, prior to the end of the second record, they sound more relaxed and simply disappear and all that is left is the music. The soundstage is open and wide on the first record, but becomes deeper by the second record. Most importanty, an ease to the sound is fully there by the second record. Hope this helps.
Reply With Quote
  #5  
Old 06-02-2021, 01:00 AM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,915
Default

Quote:
Originally Posted by slowGEEZR View Post
Stephen, I've owned and loved the Pass Labs 100.5s for quite a few years now.I leave the back switch on, but power up with the front switch to listen. They sound fine right off the bat, but sound better by the end of the first record and then, prior to the end of the second record, they sound more relaxed and simply disappear and all that is left is the music. The soundstage is open and wide on the first record, but becomes deeper by the second record. Most importanty, an ease to the sound is fully there by the second record. Hope this helps.
Many thanks. Yes, I've found that about 45 minutes of warmup is about where they get "on the cam", as we say in motor racing.

I've been listening to my little Amp Camp amps as bridged mono blocks since the beginning of the long holiday weekend, and I have to say that now that they are getting more hours on them, they are starting to sound very good indeed. Nelson Pass, I tell ya what...

And...for 654 bucks, they're rather amazing.



😻
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
  #6  
Old 06-03-2021, 06:12 AM
daveneumann's Avatar
daveneumann daveneumann is offline
Senior Member

 
Join Date: Jan 2010
Location: Louisville KY
Posts: 345
Default

I leave my Pass preamp and phono on all the time. The amps are in stand by and I turn them on about an hour before I sit down to listen. I don't notice much change after they have been warming up for an hour. This is the first solid state gear I've owned that doesn't make me want any tubes in the system.
__________________
SF Stradivari, Aric Audio Motherlode XL preamp and Super KT Parallel amps; Pass XP 27, Raven One TT, Graham Phantom II arm, Lyra Etna Lamda, Airtight PC1, Bryston 3.14 DAC, Transparent Reference & Wireworld, dedicated treated room 17 X 34 X 9
Reply With Quote
  #7  
Old 06-03-2021, 09:06 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,915
Default

Quote:
Originally Posted by daveneumann View Post
I leave my Pass preamp and phono on all the time. The amps are in stand by and I turn them on about an hour before I sit down to listen. I don't notice much change after they have been warming up for an hour. This is the first solid state gear I've owned that doesn't make me want any tubes in the system.
Tnanks, Dave.

I'm finding the same thing; the little ACAs seem to come on-song after about 45-60 minutes.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
  #8  
Old 06-03-2021, 09:08 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,915
Default

Quote:
Originally Posted by daveneumann View Post
I leave my Pass preamp and phono on all the time. The amps are in stand by and I turn them on about an hour before I sit down to listen. I don't notice much change after they have been warming up for an hour. This is the first solid state gear I've owned that doesn't make me want any tubes in the system.
Thanks, Dave, I'm finding pretty much the same thing; the ACAs need about 45-60 minutes of warm-up.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Audioaficionado.org tested by Norton Internet Security

All times are GMT -4. The time now is 03:22 PM.



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
©Copyright 2009-2023 AudioAficionado.org.Privately owned, All Rights Reserved.
Audio Aficionado Sponsors
AudioAficionado Subscriber
AudioAficionado Subscriber
Inspire By Dennis Had
Inspire By Dennis Had
Harmonic Resolution Systems
Harmonic Resolution Systems
Wyred4Sound
Wyred4Sound
Dragonfire Acoustics
Dragonfire Acoustics
GIK Acoustics
GIK Acoustics
Esoteric
Esoteric
AC Infinity
AC Infinity
JL Audio
JL Audio
Add Powr
Add Powr
Accuphase - Soulution
Accuphase - Soulution
Audio by E
Audio by E
Canton
Canton
Bryston
Bryston
WireWorld Cables
WireWorld Cables
Stillpoints
Stillpoints
Bricasti Design
Bricasti Design
Furutech
Furutech
Shunyata Research
Shunyata Research
Legend Audio & Video
Legend Audio & Video