#71
|
||||
|
||||
I'm definitely no expert on this subject, but I was also curious about connecting my amp to my conditioner. I put the conditioners screen on the one that shows how much of the power capacity you are using out of the conditioner. So I put on some electronic music (I figured heavy bass would demand the most power) and cranked it up as loud as I could without damaging the speakers. If memory serves it said I was using 45%-50%. So if I am only using half it's capacity, why would I plug it directly into the wall? Am I missing something here?
Bowers & Wilkins 683 Speakers Rotel RB-1090 2 Channel Amp Rotel RC-1082 Stereo Pre Amp Rotel RCD-1072 CD Player Pro-Ject Debut Carbon w/ Ortofon 2M Red (sitting on a piece of slate supported by 3 "solid tech feet of silence" isolation feet) Rotel RLC-1040 Power Conditioner Shynyata Research SR-Z1 Power Outlet & Venom 3 Power Cords x 4 Tara Labs RSC Vector 1 Speaker Cables & Interconnects Primacoustic Room Treatments |
#72
|
||||
|
||||
I think the answer to whether active line conditioning is current limiting is likely system specific and, perhaps, implementation specific. Remember that power cords can limit current, too. Bottom line: no universal answer, try it both ways in your own system.
|
#73
|
|||
|
|||
I had the opportunity to directly compare Super Titan Isotek vs Furutech etp 309 vs SIN Audio PSD. The passive approach is just right to music. Furutech is a great value when price is taken in consideration, PSD has liberated the whole system and allowed performance on a completely new level, while the Super Titan...probably justifies its name with its price and size.
|
#74
|
|||
|
|||
I have the Isotek Sigmas EVO 3. When auditioning the Isotek (I also had an Isol8 and 2 Transparent Power Isolators at hand) I found that the Sigmas was the best match for me and my system. It contributed with calm blackness.
When connecting the amp directly to the wall outlet I get a somewhat "harder" and a more "restless" presentation. |
#75
|
|||
|
|||
My wall outlets and the outlets in my Audio Excellence Power Wing II are the same -- Oyaide R-1. So, any differences I hear when plugging the conrad-johnson CA200 integrated into them should be the effect of the power line conditioner.
I prefer the sound with the Power Wing II: blacker background, more low level detail, and a wider/deeper sound stage. Of course this is going to be system dependent but that's what I've found to be the case for mine. |
#76
|
||||
|
||||
I prefer my amps plugged into my Audience aR2p-TO conditioner over just plugging them into the wall outlet. When I had a Purepower 2000, I preferred plugging the amps into the wall outlet.
__________________
Paul Harbeth 40.3 XD, Sound Anchor stands w/ Stillpoints, Luxman M900 & C900, Aurender N20, Jay's Audio CDT3 - MK3 CD player, Mola Mola Tambaqui DAC, Shunyata Everest, Altaira |
#77
|
|||
|
|||
Quote:
------------------------------ Lumin S1 Pass XP-20 pre, X600.5 amps Magico S5 speakers Shunyata Triton v2/Typhon for source, Cyclops v2 (2) for amps Shunyata Z Anaconda XLR analog ICs, Z Anaconda speaker cables Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables Revelation Audio Passage Cryo-Silver Reference DB-25 umbilical power cable Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers Three 20 amp circuits.
__________________
Bud |
#78
|
|||
|
|||
Can you not run both amps through one cyclops?
|
#79
|
||||
|
||||
With either my MC452 or the MC275s, I connect them directly to the 20 amp dedicated lines. All the rest of my 'front end' components are connected to a PS Audio PPP which also is connected to its own 20 amp line.
Sent from my iPad using A.Aficionado
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum Eclipse 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#80
|
|||
|
|||
You could, but I found it is better to have two seperate lines for two amps.
__________________
Bud |
|
|
Audio Aficionado Sponsors | |