![]() |
#51
|
|||
|
|||
![]() Quote:
I just received a used LP125sa+ and plan to post my impressions, and how it compares with the Classic 60 after it gets settled in a little. Hopefully, it will shed some light on how the Classic 60 would stack up against the LP70 as well. |
#52
|
||||
|
||||
![]()
I wonder if the very long time breaking in might be the lower voltage/current in a preamp as opposed to a poweer amp? One reason I wonder about this is the Mundorf caps in my Canton speaker crossovers took at least the 1500hr you are talking about before they settled into the their very, very nice present sound. On the flip side, the Mundort SG coupling caps in my TU-8500 preamp seemed to have only taken 3-400hr, or so to break-in. I'm jonesing for a set of Canton 7K or 8K speakers, but the prospect of having to wait so long for them to 'strut their stuff' has me very hesitant.
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#53
|
||||
|
||||
![]() Quote:
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components. |
#54
|
|||
|
|||
![]() Quote:
CJ Classic 60 (EL34) with Vintage Tubes Before I begin I need to point out that the Classic 60 is upgraded with vintage tubes, some NOS and some used. Compared to stock tubes the performance of the Classic 60 w/vintage tubes is significantly improved. I mean it’s not really that close. With vintage tubes the Classic 60 sounds more powerful than with stock tubes - greater musical authority and a stronger and more controlled bass. The specific tubes I’m using in the Classic 60 are 4 NOS Mullard EL34’s (from Brent Jesse), 2 used Sylvania 6DJ8, and a used RFT ECC82/12AU7. All used tubes had tested strong by experienced e-bay sellers. These sellers had a user rating of 100% or near 100%. The NOS Mullards are pricey, but they are the best EL34’s I have tried. I also like NOS Russian 6N3C/63PS as EL34 replacements, and they don’t break the bank. Other EL34’s I have tried are by RFT, Sylvania, and Groove Tube. They are good, but I definitely prefer the Mullards with the 6N3C/63PS coming in second. The control tubes can still enhance the performance of the Classic 60. Some people don’t give much love to the Sylvania 6DJ8 and RFT ECC82/12AU7 in general, but I find they sound excellent in the Classic 60 and definitely better than the stock tubes. Also, their cost on e-bay is fairly reasonable. Again, if you buy tubes on e-bay, only buy NOS or tubes that test strong – and only from experienced sellers with a 100% or near 100% rating. LP125sa+ with a Mullard CV003 Tube Now to the LP125sa+. This amp weighs 82 lb and with the shipping box, which contains plywood, the total weight was slightly more than 100 lb. For me it was a real chore to move around and unbox, but after some initial struggles I managed. The tubes came in a separate shipping box from Upscale Audio and as mentioned earlier were new and required break-in. After break-in I ended up replacing the supplied Phillips 6189 tube with a Mullard CV003 tube for use in the V1 socket. I have never cared for the Phillips tubes I have heard and the 6189 was no exception. On the other hand, the replacement Mullard CV003 is a great sounding tube, although expensive. The change to the CV003 tube in the V1 position of the LP125sa+ resulted in a noticeable improvement in sound. I bought mine on e-bay, but as of this writing there are CJ test grade CV003 tubes available for $90/ea at Upscale Audio. Comparison So how does the LP 125sa+ compare to the Classic 60 w/vintage tubes in my system (Tekton DI speakers, PrimaLuna Dialogue Premium pre-amp, Grado Statement 2 cart, Sota Sapphire w/Audiomods V tonearm, Manley Chinook phono pre-amp w/6N23P Silver Shield tubes)? 1) The Classic 60 w/vintage tubes has a powerful sound with musical authority and bass authority, but the LP125sa+ more so. The Classic 60 w/vintage tubes also has a somewhat darker sound character compared to the LP125sa+ which is not a good or bad thing for me. 2) The LP125sa+ also produces a larger sound stage, a greater sense of space or presence, and is slightly more forward than the Classic 60 w/vintage tubes. The slightly more forward sound is neither a good or bad thing for me. I once read an article by a speaker designer who said that good speakers and systems, in general, usually fall into two categories – “they are here” or “you are there”. Using the Classic 60, with or without vintage tubes, my Tekton DI speakers are definitely in the “you are there” category. However, when using the LP125a+ my system moves a bit toward the “they are here” category. Not a good or bad thing for me, but I thought it might be of interest. 3) The LP125sa+ has the edge in things like body, bloom, and decay although the Classic 60 w/vintage tubes is good in these respects as well. 4) The Classic 60 w/vintage tubes does have a bit more harmonic richness, and to my ear it is most noticeable in the lower treble and upper midrange. Imho, the Classic 60 w/vintage tubes produces slightly more beauty in the lower treble and upper midrange than the LP125sa+, but the LP125sa+ is no slouch here as well. On the other hand, the LP125sa+ has greater transparency throughout the frequency spectrum. Classic 60 w/vintage tubes sounds a tiny bit grungy/cloudy in comparison to the larger power amp. Please keep in mind that Classic 60 does not have the Teflon SE cap upgrade. This may or may not close the gap between the two amps. Conclusions Ok, so which power amp do I prefer - the Classic 60 (EL34) with all vintage tubes or the LP125sa+ with a single vintage Mullard CV4003 tube? For me (with the Tekton DI in my system) the more robust and more transparent LP125sa+ gets the nod over the more harmonically rich EL34 Classic 60 w/vintage tubes. I need to add that it is not a huge preference, but it is a definite preference. Also, please keep in mind that the EL34 Classic 60 does not have the Teflon SE cap upgrade. This might close the gap to some degree to some degree at least. I want to add that I later hooked up a pair of modified 1.6 Magnepans. The Tekton DI are my preferred speakers, but the Maggies are pretty decent. Well this is going to be confusing, but the Magnepans seem to prefer the darker sound of the Classic 60 w/vintage tubes. There may be other factors (impedance, etc.?) but I did not look into it. At any rate the amps appear to be speaker dependent. I hope this write-up is helpful and not too confusing. Bottom line is my first choice (of what I listened to) was the LP125sa+/Tekton DI speaker combination. It would be interesting to upgrade the EL34 Classic 60 to Teflon caps, but that probably won’t happen, at least for a while. It will go to my bedroom for the time being. I’m glad I have the LP125sa+, but I really like the CJ Classic 60 with upgraded tubes as well and could happily live with it - and that’s after hearing the more powerful LP125sa+. Additionally, at some point, I’ll probably look into a pair of very expensive Reflector 6H30P-DR tubes for the other 2 control tubes in the LP125sa+. As for now it sounds just fine the way it is! |
#55
|
||||
|
||||
![]() Quote:
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components. |
#56
|
|||
|
|||
![]() Quote:
Check out this review of the LP125sa for more info. http://www.hifiplus.com/articles/con...plifier-hi-fi/ |
#57
|
||||
|
||||
![]()
My CJ Classic 60SE was an excellent amp wired in UL. I found the reissue Tung-Sol EL34s to be a very good tube and the GL KT77s to be a step up from there. It would be one of my favorite amps and don't think you can go wrong with one, assuming the right speakers.
Calculon, are your CJs wired in UL or triode?
__________________
Glenn... Canton Reference 9 Clearaudio SM Pro Focal Bathys JLA 10" Dominion Kuzma Stabi S w/MC & MM Magnepan 1,7i McIntosh MA8950 & MR88 Oppo 203 Roon Nucleus Rose Hifi RS150B Shunyata Gemini-4 Sony ST-A6B, TA-F6B, ST-J75 & PS-X75 Sorane SA1.2 & TA-1L Stillpoints LP1v2 WW Pt, Au & Ag |
#58
|
|||
|
|||
![]() Quote:
I do have a quad of reissue Tung-Sol EL34B's which are pretty decent, but don't match the NOS EL34's. I also have a quad of GL KT77s. Maybe I have a bad batch. They aren't bad, but in my Classic 60 I thought they weren't quite as good as the Tung Sol. A little fuzzy in comparison. Perhaps the SE upgrade corrected that. |
![]() |
|
|
Audio Aficionado Sponsors | |