#11
|
||||
|
||||
Quote:
Again, though, I have other possible changes/upgrades I'm considering and this could morph into a SACD or speaker move instead of the TT (I've looked at possible SACD replacements, in fact). Of the three, my Mirage M-3si speakers would be the toughest to give up, because I really like them. They're 24.5 years old but still good. Still, that Xtension 10 looks nice, even if I'd have to learn how to install a cartridge on my own; the Xtension 12 can be had with an Ortofon arm with a removable headshell , but that's over $2K more than the package with the Evolution arm .
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#12
|
|||
|
|||
Quote:
|
#13
|
||||
|
||||
The last time I hooked up my turntable to see if I wanted to get back into vinyl, I had the turntable on a table and I walked over to the preamp to adjust the volume which was NOT playing loudly. Upon taking my second or third step from the TT to the preamp, the needle bounced, I heard a bang, had a brief earthquake in the room, blew a fuse in the IRS and decided I should stay with digital!
Last edited by GaryProtein; 10-24-2017 at 12:29 AM. |
#14
|
|||
|
|||
After researching a bit further into the Pro-Ject Ground It Carbon base I'm afraid it might not be suitable for my analog setup. Magnetic isolation suspension designs generally have to be designed with a target supported weight range in mind, otherwise they can be a mismatch which will be ineffective and possibly even bottom out. The heaviest Pro-Ject table seems to be in the 45 lb range and my Nottingham Dais is closer to 100 lbs hence my concern about suitability. If anyone has any further specifics in this regard I would welcome the input, TIA.
|
#15
|
|||
|
|||
Quote:
I keep my system in my living room and a wall mount wasn’t something I wanted to deal with either. I do miss a removable headshell but don’t change cartridges very often so it isn’t the biggest issue. I just pick a day when I’m not rushed and don’t drink too much coffee first lol! Best of luck! |
#16
|
|||
|
|||
I contacted Pro-Ject through their website to inquire about the suitable turntable weight range to be used with their magnetically suspended Ground It Carbon base, and will share their response when I receive it.
|
#17
|
|||
|
|||
My turntable is in a built in isolated from the floor
|
#18
|
|||
|
|||
Quote:
"The factory replied that 100lbs is OK, but not ideal. The weight will compress the suspension, but not damage the magnets. So, the decoupling of the mass will be limited, but still the advantage of the carbon support." |
#19
|
||||
|
||||
Quote:
And, I've just realized that the demonstration by "Dr. Carl" in the second link from my first post is a mod he performed, it seems. So maybe the SOTA isn't as vibration-resistant as once thought. Still, SOTA tables are known for their suspension systems, so maybe I should still look at them.
__________________
SOTA, Grado, SME, Van den Hul, Gingko turntable setup; Pioneer Elite LD, BDP; Sony OLED TV; Magnum Dynalab tuner, antenna; MIT S-video cable; Pangea HDMI cables; DVDO video processor; McIntosh SACD, preamp, power amps; Telefunken Black Diamond preamp tubes; Kimber IC; Transparent IC, PC, SC; Mirage speakers; PS Audio, Shunyata PC; Audio Additives RCA caps; Furman power conditioning; Sanus: racks |
#20
|
|||
|
|||
My system is mounted on a very rigid Target stand which is on spiked feet, and the top turntable platform has its own spiked isolation all in a room on a solid slab. So I'm not experiencing any vibrational issues or problems with footfalls, just always thought I'd like to try a magnetic suspension if given the opportunity.
|
|
|
Audio Aficionado Sponsors | |