#1
|
||||
|
||||
Trouble shooting help?
I am getting an intermittent rattle in the right woofer column of my Betas. It sometimes happens at higher levels and of course, when there is high levels of deep bass. However, I cannot always reproduce it even under identical circumstances.
So is it in the Servo woofer or in the servo EQ controller or perhaps something else? Could it be temperature related? Eg after they are driven for a while? I appreciate these are old and few if any of you have ever seen them or heard them. Craig
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#2
|
|||
|
|||
Awesome speakers! I spent hours and hours listening to Betas at a shop down in Orlando many years back.
Any chance you can isolate it to just one woofer in the column? It certainly could be a servo related issue, but possibly one or more drivers has a slightly sagging suspension due to age? If that turns out to be the case, you might be able to remove the offending driver & re-mount it after rotating it 180 degrees. Hope you get everything back to perfect, and enjoy them for many more years! |
#3
|
||||
|
||||
Yeah, duh, I will switch the column sides! Good idea. Thanks!
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#4
|
||||
|
||||
I found another track, level, etc combination where my right column was displaying an intermittent 'pop' so I switched the columns and played that track over and over again. Geesh, the pop never came back.
Soo, I am just listening to music and not looking for gremlins. Oh the joy of 25 yr old speakers! Sent from my iPad using A.Aficionado
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#5
|
||||
|
||||
Does it happen when you play both digital and LPs or only LPs?
|
#6
|
||||
|
||||
interesting question Cyril but I haven't played an LP since I got my Silenzio.
Sent from my iPad using A.Aficionado
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#7
|
||||
|
||||
I ask because sometimes, you will get acoustic feedback from the TT that causes the woofer bins to rumble like crazy in which case you might need to either try isolating the table better or using a subsonic filter but it sounds like it's not TT related. Thought it might be worth a try
|
#8
|
||||
|
||||
Quote:
Sent from my iPad using A.Aficionado
__________________
Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2 X 2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, Clearaudio Performance SE. Satisfy tonearm & Maestro Wood MM cartridge. Power: Shunyata Everest 8000, Sigma XC v2, Sigma NR v2, Block Audio PCs, Defender, ADDPowr Wizard Grounding: Shunyata Altaira CGS - 4 X Alpha CGS cables, Network : Supra Cat 8+, Twin (Nenon) Modified Buffalo GS2016 Switches, Keces P3 LPSU, Cables: Wireworld Platinum 8 USB, Wireworld Platinum 8 Speaker cables, 6M & 1M Tubulus Concentus ICs, Other:Two PSI Audio AVAA C20, Multiple GIK products, Stillpoint Apertures, Stillpoint Minis and Ultra SS, Three 20 Amp lines, Furutech GTX - Gold outlets, Adona Rack |
#9
|
||||
|
||||
You're 10 steps ahead of me Good luck. Hope you can find the source of the issue and rectify
|
#10
|
|||
|
|||
Question for crwilli… did you solve your problem? I developed a buzz in one woofer tower that I've tracked to the Servo crossover. Changed out amps and the buzz remained. Switched woofer towers and the buzz stayed on the same side. Switched leads from the Servo and the buzz switched. Looking for any guidance you might give. Thanks.
|
|
|
Audio Aficionado Sponsors | |