|
Cables Galore Speaker cables, Interconnects & Power cords |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Nordost quality concern
Attachment 63842Hi,
A year back the male side of AC connector on my Valhalla 2 power cord was broken in pieces by itself. An AA friend convinced me to contact factory for possible free repair. Nordost questioned me a a bit suspect that I may drop it or hit it with something, but anyway was giving me factory return authorization number. The repair was very quick and free of charge including free return trip. That was such a great company. Once it come back. I barely use it at all as during the downtime I managed to find new cable already. Until today I put it in the box and I heard something inside of the IEC side.. and ouchh the IEC side started to disintegrated the same way that I happened before. I have two choices. 1. doing the same thing again by contacting Nordost and spend some money to ship it to USA and hope to get it back safely again. 2. Ask them to send me a replacement part and I repair it myself. 3. forget about it and just put some nice Furutech connectors instead for more durability. May be FI50NCF. But this way the cable cannot be resale anymore as no one will trust that it is genuine. Last edited by TOGA; 01-13-2021 at 10:36 AM. |
#2
|
|||
|
|||
|
#3
|
||||
|
||||
Definitely have Nordost make this right for you. They are selling a premium product and you should expect premium materials and superb support. Once you get it back you can decide if you want to keep it, and a lot of that decision would be based on their quality of support.
__________________
Main System: Amati Futura Mains Amati Homage VOX Center, Proac Response 1sc Rears, Three MC2301's for L,C,R MC 602 for the rears C 1100, MX 151, MCD 1100, MR 80 Nottingham Dais with Wave Mechanic Sumiko Palo Santos Presentation SurfacePro 3, RPi 4, ROON, WW Starlight Platinum USB, Schiit Yggdrasil, Benchmark DAC3 HGC MX 151, OppO BDP-95, JVC RS-500 DILA projector, 106" diagonal Stewart Luxus Screenwall Deluxe with Studiotek 130 G3 material. Lake House: Ohm F, MC 275V, C2300, MR 77, Rega P3 OnDeck: McIntosh MAC 4300v |
#4
|
|||
|
|||
The last time they provided superb support.
But they did not quite believe me that their plastic is of very poor quality. This is a very costly Valhalla 2 with Halo Plug that they were so proud of. The last time I asked them about Furutech, they replied that their connectors were low mass design, which help the sound and they did not recommend high mass Furutech. But I remembered their Odin 1 came with that Furutech. Toga |
#5
|
|||
|
|||
+1. If nothing else, it helps the company understand issues with its product.
But I'd dump the cable after receiving it back from the factory. I just don't have patience for things that don't work properly. The OP could probably get a few $$ for it from a place like TMR. They're nice people. It's where I dumped my Aurender.
__________________
Primary sources: VPI TNT III/SDS turntable, SME-V arm; Bryston BDP-3 digital player; Bryston BDA-3 DAC; McIntosh MVP-881 disc player; McIntosh MR-80 tuner. Preamplifier Audio Research Ref 5SE; Audio Research Ref Phono 2SE; Moon 430 HA. Amplifiers Conrad Johnson Premier 1B; Audio Research D-300; Bryston 4B. Speakers Infinity IRS Beta. Recorders Tandberg TD20A; Crown SX-822; Nakamichi 670ZX; Alesis Masterlink ML-9600. Power Tice Power Block/Titan (x2); McIntosh MPC1500; API Ultra II-20; multiple 20A derated dedicated lines. |
#6
|
|||
|
|||
Wow that's quite bad. I mean, twice.. There is definately something going on and going wrong here. There seems to be a high level of stress in that connector in that it shatters in pieces like this. In my field, I have seen quenched steels shatter in pieces similar to this due to internal stress. Looks like the material is too brittle. You live in Thailand if I am not mistaken, I wonder if this is not a humidity/temperature related issue. Who knows..
As Cleeds suggested, I would as well have it repaired to pass it to someone else and move on. As we say in french, "jamais deux sans trois". It means, never two without three.
__________________
Serge |
#7
|
|||
|
|||
Quote:
I think the plastic is poor quality. In my room temp was never higher than 31c. And all other cables survived . All of these are all fine. IMG_3336.jpg |
#8
|
|||
|
|||
Looks subpar
I’m disappointed Maybe a bad batch? |
#9
|
|||
|
|||
I think it has to be a bad batch as Joey suggests, or some weird thing related to the storage conditions. Obviously, if this was something that occurred with any frequency, it would be a huge problem for Nordost
__________________
Clearaudio Ovation with Tracer Dynavector KARAT 17DX Naim Uniti Core Schiit Yggdrasil McIntosh C22/MC275 Wilson TuneTots B&W DB3D Nordost QKore/QBase/Frey 2 Transparent Super IsoAcoustics GAIA II Stax SR-009S with SRM-700T |
#10
|
||||
|
||||
Nordost quality concern
This is odd - I have not had any problems with the V2 connectors over several years. No challenges on the plastic at all.
You have lifetime warranty and I would certainly ask Nordost to correct. You could even ask Nordost to terminate with Furutech NCF which would then not void your warranty and support. Last edited by restock; 01-15-2021 at 04:03 PM. |
|
|
Audio Aficionado Sponsors | |