Advice needed on dedicated circuits

[briweed]

All,

I am in the process of running 5 dedicated circuits to my 2 channel room. I believe I have decided on using the Furutech GTX-D's with the CF wall plate and mounting plate.

I need some advice on what to run for my in wall wire. I have heard good things about JPS. Does anyone have any experience with their in wall wiring product? Anything else I should be considering? In all I only have the need for about 50 feet or so, as my panel will be in the same wall as the outlets.

thanks,
B

[-E-]

Instead of running 5, what about 1x100a 220v lead to a sub panel then breakout to 5x20a 110/120 using very short, high end 110 to your outlets?

[briweed]

Originally Posted by -E-

Instead of running 5, what about 1x100a 220v lead to a sub panel then breakout to 5x20a 110/120 using very short, high end 110 to your outlets?

that is what I am planning. The sub panel will be in the same wall as my outlets, so hence the short runs. (50 feet is over what I will actually need).

B

[-E-]

Yeah then that is most def the way to go.

[rnrmf1971]

I don't know specifics about JPS in-wall cabling, other than what's described on their site, but I do think their cables are among the best I've ever heard. If I were installing in-wall wiring, I would likely choose JPS Labs.