Quote:
Originally Posted by jdandy
Karl.......I used four metric M6 phillips pan head machine screws. They measure 45mm length. They are slightly larger than the hole in the heat sink but the softer aluminum allows the machine screw to tap threads into it. Gradually screw them through the heat sink across the top, then screw each screw a turn or so back across the top until the amp heat sink pulls away from the recessed area of the subwoofer cabinet. Once the amp plate is free, unscrew the machine screws and save for future use.
|
Thank you Dan, much appreciated!
__________________
Sources: Linn Klimax DS, Kaleidescape Strato S Amps: MC452 & MC301 Speakers/Subs: Sonus Faber Olympica III’s & Nova CII in Wenge, 2 x JL Fathom 112's w/ Sound Anchor stands Pre/Pro: C1100, MX122 Power: PS Audio P10 Cables: Center speaker-Wireworld Silver Eclipse 8, L/R Speakers-Wireworld Gold Eclipse 7, Kimber Palladian Power Cables, Kimber KS1126 Interconnects Misc: Furutech Flux 50 NSF, Furutech GTX-D NSF outlets, Furutech Boosters
|