Quote:
Originally Posted by d_elm
I have a single-ended Bryston 10B connected to the single-ended output of a KX-5 twenty and previously to a K-5xeMP. No effect on the balanced output of the preamps.
|
As I understand Hansen's position, there is no problem with that unless you interpose the 10B between the preamp and amp. I had planned to high-pass to the amp above 100 Hz, low-pass to the subs below 100 Hz using a balanced 10B and was advised not to do that. Now I plan to only low-pass to the subs, staying out of the preamp-to-amp link. Does the output of your 10B go to an Ayre amp?
I suppose I could try both, because counterposed to what I understand is a zero feedback issue I suspect the LS50s would be well served by shunting frequencies below 100 Hz from them.
db