View Single Post
  #1  
Old 04-26-2021, 01:44 PM
Puma Cat's Avatar
Puma Cat Puma Cat is online now
Cool, calm scientist

 
Join Date: Aug 2010
Location: East Bay, CA
Posts: 10,916
Default Danny Richie tears the Special 40 apart

Literally and figuratively.

Danny Richie of GR-Research recently did his extensive analysis (including measurements with his Clio system) of the Dynaudio Special 40.

Looks like Dyn cheaped out on this speaker that originally sold for $2995.

The woofer measures suprisingly poorly with notable peaks at 1110 hz, 3400, hz and 10K. Danny refers to it as "rough".



There is also a significant ringing component to the woofer in the spectral decay. John Atkinson obtained effectively identical results when he measured the Special 40 in Stereophile.



The parts for the crossover, wiring and fill is also problematical.

Iron-core inductors, sand-cast resistors, cheap poly and electrolytics caps in the XO, and el-cheapo, 16 AWG PVC insulated clip-on leads for the internal wiring, and a poorly-damped cabinet with cheap fill.

Danny's reaction...




Danny did say that Dyn spent an extra 10¢ and used binding posts that are non-ferric, so..that's good.

Danny went through and fixed the issues with the drivers, their measured performance and improved the overall frequency response to be smoother and within 1-1.5 dB. Also knocked down the knee at 1100 Hz peak in the mids.



You'll also note that the behavior of the woofer is quite a bit smoother.

He also reduced the ringing component of the woofer to a considerably lower level in the spectral decay.


I'll leave you to watch the video to see how got these issues fixed with his mods. Needless to say, he improved it quite a bit. Most notable is the improvement in the vertical off-axis response with the drivers remaining in phase as you go up.

https://youtu.be/0TxorWiy78w

Total cost of the parts for upgrading the Dyn Special 40 is $245. Having built one of Danny's speaker designs using his parts, wire, and drivers, I would think the Special 40 is quite a bit better with his modifications.
__________________
Lumin P1 streamer/DAC/preamp, Constellation Inspiration integrated TT: Michell Gyro SE MkII, SME V, Koetsu Urushi Vermilion, EAR324. Harbeth 30.2s, REL R-305, Shunyata Alpha V2 ICs, Alpha V2 SPs, Sigma XC, Sigma NRv2, Omega QR-s & Alpha NRv2 PCs, segmented Altaira SG stack w/ Alpha & Omega CGCs, Everest 8000 PD. Remote Server Room: Uptone EtherREGEN, AfterDark Master Clock & LPS, Alita, Battle Angel, (Akasa NUC Roon Core), iFi DC Purifiers (for SMPS used for Alita & router), Shunyata Gemini combo power distributor & Altaira-type CG GP-NR hub, Venom & Alpha CGCs, Shunyata NRv14 power cords for digital components.

Last edited by Puma Cat; 04-26-2021 at 01:54 PM.
Reply With Quote