Exclusive: Aperture II Panels being used in Coast Mastering Studios
 

Here are some "inside photos" of the Aperture II Panels in use at Coast Mastering.

https://www.audioaficionado.org/atta...1&d=1607023948

https://www.audioaficionado.org/atta...1&d=1607023970

https://www.audioaficionado.org/atta...1&d=1607023976

https://www.audioaficionado.org/atta...1&d=1607023982

"We use Aperture II's from Stillpoints to both absorb and diffuse energy in the room as needed to allow for a very direct presentation from the speakers. Imaging and localization are incredible."...

Aperture wall mounts

https://www.audioaficionado.org/atta...1&d=1607029154

https://www.audioaficionado.org/atta...1&d=1607029159

I will post a link where these wall mounts can be purchased very inexpensively;

https://pipishellav.com/collections/...chtvs-monitors

Pricey but very effective. :yes:

Thanks for posting the photos, Ivan. This is the first time I’ve seen the panels angled in. Typical usage has been flat on the wall, or on stands but still flat against a wall. When is it better to angle them in like that?

Ivan,
What size wood screw is used to fix the Mount to the back of the Aperture?

The real question is how thick is the back panel of the Aperture?

Craig... #6 - 1/2”

The Aperture II Panel is 3-1/8” thick.

Thanks Ivan. I think the entire unit is 3 1/8” deep.

I suspect the back wood panel is more like 3/8”...

I don’t want to screw through it into the magic inside.

A 1/2” screw should indeed work well when adding the thickness of the wall unit itself.