AudioAficionado.org - Quick Pass Labs INT-60 Fuse Question

AudioAficionado.org (https://www.audioaficionado.org/index.php)

- Pass Labs (https://www.audioaficionado.org/forumdisplay.php?f=143)

- - Quick Pass Labs INT-60 Fuse Question (https://www.audioaficionado.org/showthread.php?t=47784)

Quick Pass Labs INT-60 Fuse Question

Does anyone know if the fuse for the INT-60 is the same as in the 250.8 or 260.8? It isn’t specified in the manual.

3AG 250 volt slow blow?

Quote:

Originally Posted by LarsT (Post 999425)

Does anyone know if the fuse for the INT-60 is the same as in the 250.8 or 260.8? It isn’t specified in the manual.

3AG 250 volt slow blow?

INT-60

for AC mains 120v : 5A 3AG-250v Slow Blow

for AC mains 230v : 2.5A 3AG-250v Slow Blow

Got this response from Pass today via email

If you are using an aftermarket fuse on the INT-60 I would choose 6A slow blow (time delay) for 120Vac service and 3A slow blow (time delay) for 240Vac service. Sorry, I don't know where you are or what market. Check the voltage requirement on the back of the amp vs you supplied line voltage

Check the fuse size. Very early INT-60's we built with the North American standard (UL rated )1/4" x 1-1/4" glass fuse. Latest production builds use the European (CE rated) fuse which is 5mm x 20mm in size.